26364
20
Zoom out
Zoom in
Previous page
1/80
Next page
20 2. Settings
Machine Functions
2.
2. Settings
Press MENU/OK and 29. You will receive a print-
out of the menu functions of your machine; an ad-
ditional sheet provides information about the current
settings.
ere are two ways to access functions in the menu:
²
If your machine is in energy saving Stand-by
mode, press any button to return to the op-
erating mode; only then can you access the func-
tions (see Energy Saving Mode).
1 Access a menu function, by pressing MENU/OK
and page through the menu entries with /. e
selected function is marked with an arrow > (Crys-
tal 650) or by a coloured bar (Crystal 660). Con-
firm with OK to select a menu function.
2 Access a menu function directly by pressing
MENU/OK and entering the corresponding
menu numbers with the number keypad. Direct
menu access offers a quick and simple method for
selecting functions.
²
Return to the last menu entry with C; return
to the starting mode with X.
If you would like to change the current settings, the fol-
lowing functions are available:
Entering the Date
and Time
1 Press MENU/OK and 21.
2 Enter the date and time, and save the settings with
OK (see chapter Installation / Entering the Date
and Time).
²
If the power supply is interrupted (e.g. after
a power failure), you must enter the date and
time again.
Entering Telephone
Number and Name
1 Press MENU/OK and 22.
2 Enter your telephone number and your name, then
save with OK (see chapter Installation / Entering
Telephone Number and Name).
Æ
Your name and number are sent on the top
edge of every page (= header) together with
the date, time and page number if you have saved
this information with the functions 21 and 22.
Setting Country
and Language
Here you can specify the local telephone network and
display language.
1 Press MENU/OK and 281. Use / to
select the country in which you operate your
multifunction machine and confirm with OK. Al-
ways set the country, otherwise your machine is not
configured for the local telephone network.
2 Set the desired language by pressing MENU/OK
and282. Use / to select the language and
confirm with OK.
ISDN Connection
Your multifunction machine is not an ISDN device
(group 4), it is an analogue device (group 3). For this
reason, it cannot be operated directly on an ISDN con-
nection; either an (analogue) adapter or an ISDN sys-
tem with connections for analogue devices is required
for this. For additional information, please consult the
operating instructions of your ISDN system or ask your
telephone service provider.
Private Branch
Exchange (PABX)
Private branch exchanges are typical in many offices and
private households. To obtain a connection to the lo-
cal telephone network from such a line (extension), you
must dial an outside line access code.
Æ
An additional telephone connected together
with the multifunction machine on one tele-
phone line is not considered an extension!
Configure the following settings if you would like to
operate your multifunction machine on a PABX:
1 Press MENU/OK and 231. Use / to select
PABX:YES and confirm with OK.
2 Use / to select the function 232 Prefix and
press OK.
3 Enter the number of digits for designating an ex-
ternal telephone number. e necessary number
depends on the internal telephone number or-
ganisation of your telephone system (e.g. if you use
four-digit extension numbers, you must enter 5).
Confirm with OK.
4 Enter the outside line access code that is required in
order to reach the public telephone network. is is
usually 0. Confirm with OK.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips CRYSTAL650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips CRYSTAL650 in the language / languages: English as an attachment in your email.

The manual is 6,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips CRYSTAL650

Philips CRYSTAL650 User Manual - German - 88 pages

Philips CRYSTAL650 User Manual - Dutch - 88 pages

Philips CRYSTAL650 User Manual - Italian - 84 pages

Philips CRYSTAL650 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info