Using your phone
15
Press on the calling handset
• Your desired handset rings.
Press on the called handset
• The intercom is established.
Note
If the called handset is busy, a busy tone will be
emitted from the calling handset.
4.6.2 How to transfer an external call to
another handset
During an external call :
Press to initiate an internal call
• The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
Press / to select your desired
handset
Press to call your desired handset
• Your desired handset rings.
Press on the called handset to start
intercom
Note
You can press to switch the call between the
internal call and the external call.
Press on the calling handset
• The calling handset transfers the external call to
the called handset.
4.6.3 How to make a 3-way conference
call
The conference call feature allows one external
call to be shared with two handsets (in intercom).
The three parties can share the conversation and
no network subscription is required.
During an external call :
Press to initiate an internal call
• The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
Press / to select your desired
handset
Press to call your desired handset
• Your desired handset rings.
Press on the called handset to start
intercom
4
3
2
1
5
4
3
2
1
4
3
Note
You can press to switch the call between the
internal call and the external call.
Long press on the calling handset
• The calling handset, called handset and the
external call would be in 3-way conference.
During the conference call :
Press to put the external call on hold
and go back to internal call
• The external call is put on hold automatically.
Press and hold to establish the
conference call again
Note
Any handset hangs up during a conference call
will leave the other handset still in connection
with the external call.
4.6.4 Caller Line Identification (CLI)
Caller Line Identification (CLI) is a special
service that you may subscribe from your
network operator. If you have subscribed to CLI
service and provided that the identity of the
caller is not withheld, the number or name of
the caller will be displayed when the phone
rings so that you may decide whether to answer
the call or not. Please contact your network
provider for more information on this service.
4.6.5 Call waiting
If you have subscribed to Call Waiting service,
the earpiece will emit a beep tone to inform
you that there is a second incoming call.The
number or name of the second caller will also
be displayed if you have subscribed to Caller
Line Identification service (CLI). Please contact
your network provider for more information on
this service.
To answer the second call, press .
4.7 How to find a handset
You can locate the handset by pressing on
the base station.
All the handsets registered to the base will
produce the paging tone and you can stop the
paging by pressing / / / on the
handset or on the base again.
2
1
5
