215267

Philips bsure sv2 lcd projector Manual

22
Zoom out
Zoom in
Previous page
1/34
Next page
>
For computer signal input, the following ‘Display’ and ‘Picture’ adjustments can be made.
Display adjustments
• Press Menu and select ‘Display’ in the menu bar.The following ‘Display’ adjustments can now
be made according to the instructions under ‘General explanation’:
– Digital Freeze
captures a moving picture (still picture);
– Digital Zoom
enlarges a part of the picture;
– Magnification
adjusts the zoom factor;
– Auto image
automatically sizes and positions the image to fit optimally in the screen picture;
– Horizontal size
adjusts the computer image in a horizontal direction to make the image completely fill the
screen;
– Phase
minimises picture imperfections.When connecting the projector to your PC for the first
time, be sure to adjust the phase control for optimal readability of the projected text;
– Shift
adjusts the computer image in horizontal and vertical direction to centre it on the screen.
Some examples
The following ‘Display’ adjustment procedures, follow a slightly different sequence of actions, or
may need some further explanation.
Digital Zoom/Magnification
‘Digital Zoom’ is used to enlarge a part of the picture.
1 Press Menu.
– The menu bar will appear.
‘Display’ is highlighted and its sub menu is shown.
2 Use Cursor Control to move the cursor to ‘Digital Zoom’.
3 Select ‘On’ to switch ‘Digital Zoom’ on.
• Press OK to continue, or
• Press Menu to exit and continue with the previous Zoom settings.
4 Use the zoom target to select centre of the screen area you wish to enlarge.
• Press OK to confirm.
5 Use the Magnification slider to adjust the Zoom factor.
• Press OK to confirm and exit the menu.
6 Use Cursor Control to select another section of the enlarged area (‘Panning’).
By pressing the D(igital) Zoom button on the remote control you enter directly into the zoom centre
selection screen (step 4). When Digital Zoom is already active, pressing the D(igital) Zoom button will
show the Magnification slider; pressing the D(igital) Zoom button twice will turn off Digital Zoom.
Auto image
The Auto Image function automatically sizes and positions the image to fit optimally in the
screen picture. In addition it takes care for phase adjustment. It does not affect the selected
picture format. When Auto Image is set to On, the Horizontal size, Shift and Phase options are
greyed out.
Horizontal size
The Horizontal size function is used to size a computer image to make it fit the projected
picture.When the OSD menu is active and the horizontal size option is selected, the level will
be indicated graphically on a linear scale (slider).
Computer adjustments
Tip for Windows users
To adjust size and phase correctly
1 Select ‘Start’ and then ‘Shut down’
from the Windows Taskbar.
2 Adjust the projectors size
control, so that no vertical
bars are visible.
3 Now adjust the projectors phase
control for maximum brightness
of the projected image.
4 Press ‘No’ in the Windows
shutdown screen to cancel
the shutdown action.
Note
Philips Multimedia Projector 22 English User guide bSure1 / bSure 2
5. Operation
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
Menu OK
AV
Mute
Source
Stand
by
Lamp
Temp
off
on
Display
Digital Freeze
Digital Zoom
Magnification
Auto Image
Horizontal size
Phase
Shift...
Digital Zoom is used to enlarge part of the picture.
Audio Settings
Picture
On Screen Display Menu
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips bsure sv2 lcd projector at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips bsure sv2 lcd projector in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info