811462

Philips BRI976 Manual

25
Zoom out
Zoom in
Previous page
1/169
Next page
25
English
-Folliculitis (swelling around hair follicles combined with pustule formation):
this reaction occurs very rarely and is the result of bacteria penetrating the
damaged skin. In case this reaction occurs, we advise you to consult a doctor
as folliculitis may need antibiotic ointment.
-Pain: this can occur during or after treatment if you use the device on skin
that is not hair-free, if you use the device at a light intensity that is too high
for your skin tone, if you flash the same area more than once and if you use
the device on open wounds, inflammations, infections, tattoos, burns, etc.
Troubleshooting
Problem Possible cause Solution
It is normal for the device
and adapter to become
warm (but not too hot to
touch) during use.
Use the device in a slightly cooler environment
and/ or let it cool down before continuing use.
The fan is not working. Check if the attachment is well connected. Clean
the connectors on the attachment if needed. In
case the attachment is well connected and it is
possible to produce flashes with the device,
contact the Consumer Care Center in your
country, your Philips dealer or a Philips service
center.
The device/adapter
becomes warm during
use.
The cooling airflow of the
fan is blocked by hands or a
towel.
Make sure the cooling airflow of the fan is
unblocked.
When I place the device
on the skin, it does not
release a flash. The
'READY to flash' light
blinks orange.
Your skin tone in the area
to be treated is too dark.
Treat other body areas with lighter skin tones
with Lumea.
The 'READY to flash' light
blinks orange and all
5intensity lights blink as
well.
The device needs to be
reset.
To reset the device, take the plug out of the
socket, wait for 30 minutes to let the device cool
down. The device should function normally
again. In case it does not work again, contact the
Consumer Care Center in your country.
The 'READY to flash' light
does not light up white.
The device is not completely
in contact with your skin.
Place the device at a 90-degree angle on the skin
so that the integrated safety system is in contact
with your skin.
The light exit window or
the SmartSkin sensor is
dirty.
Clean the light exit window and the SmartSkin
sensor carefully.
The device produces a
strange smell.
You have not removed the
hairs on the area to be
treated properly. These
hairs may get burned and
can cause the smell.
Pretreat your skin before you use Lumea.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BRI976 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BRI976 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info