666533

Philips BRI954 Lumea Prestige Manual

29
Zoom out
Zoom in
Previous page
1/142
Next page
29
Problem Possible cause Solution
The skin feels more
sensitive than usual during
treatment. I experience
discomfort when I use the
device.
The light intensity setting you
use is too high.
Check if you have selected the right light
intensity setting. If necessary, select a
lower setting.
You did not remove the hairs
on the areas to be treated.
Pretreat your skin before you use Lumea.
The UV lter of the light exit
window is broken.
If the UV lter is broken, do not use the
device anymore. Contact the Consumer
Care Center in your country, your Philips
dealer or a Philips service center.
You treated an area for which
the device is not intended.
Never use the device on the following
areas: inner labia, anus, nipples,
areolas, lips, moles, freckles, tattoos,
piercings. inside the nostrils and ears,
around the eyes and near the eyebrows.
Men must not use it on the face and neck
including all beard growing areas and
whole genital area.
There is no glass lter in my
attachment.
This is normal. No action required: there is no lter in the
body and armpit attachments. Only the
facial, precision and bikini attachments
have a specialized lter.
The skin reaction after
treatment lasts longer than
usual.
You have used a light
intensity setting which is too
high for you.
Select a lower intensity next
time. See chapter 'Using your Philips
Lumea', section 'Selecting the right light
intensity'.
The ash is very bright to
my eyes. Do I need to wear
goggles?
No, Philips Lumea does not
hurt your eyes.
The scattered light produced by the
device is harmless to your eyes. Do not
look at the ash while using the device. It
is not necessary to wear goggles during
use. Use the device in a well-lit room so
that the light is less glaring to your eyes.
Be sure to make good skin contact to
avoid scattered light.
The results of the treatment
are not satisfactory.
You have used a light
intensity setting which is too
low for you.
Select a higher setting next time.
You did not ash an area
adjacent to an area you
treated before.
You have to release the ashes close to
each other and there should be some
overlap between the ashes.
The device is not eective on
your body hair color.
If you have light blond, grey, red or white
hair, the treatment is not eective.
29
English
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BRI954 Lumea Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BRI954 Lumea Prestige in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info