Manual Philips BRI947 (page 22 of 192) (English, German, Dutch, French, Italian, Portuguese, Spanish)

751970

Zoom out

Zoom in

1/192

5Press the device firmly onto your skin to ensure proper skin contact. The

‘ready to flash light’ on the back of the device lights up white to indicate

that you can proceed with the treatment.

Note: When the ‘ready to flash’ light starts blinking orange, your skin is

not suitable for treatment. In this case, the device automatically disables.

You can try to use the device on other areas with a lighter skin tone.

Note: If the ' ready to flash' light does not light up white, the device is not

completely in contact with your skin.

TIP: If you use Lumea on your bikini area and want to leave some hair in

place, make sure that the skin tone sensor is not placed on the remaining

hair during the treatment, as this can cause the device to block.

6Press the flash button to release a flash.The devices makes a soft

popping sound. You should feel a warm sensation because of the flash.

Note: The scattered light produced by the device is harmless to your

eyes. Do not look at the flash while using the device. It is not necessary to

wear goggles during use. Use the device in a well-lit room so that the

light is less glaring to your eyes.

7Place the device on the next area to be treated. After each flash, it takes

up to 2 seconds until the device is ready to flash again. You can release a

flash when the 'ready to flash' light lights up white.

8To make sure that you have treated all areas, release the flashes close to

each other. Effective light only comes out of the light exit window. Part of

the device that is in contact with your skin is slightly larger therefore there

should be some overlap. However, make sure you flash the same area

only once.

Note: Flashing the same area twice does not improve the effectiveness of

the treatment, but increases the risk of skin reactions.

Note: Do not use any pencil or pen to mark the areas to be treated, as

this may cause side effects to your skin.

9When you have finished the treatment, press and hold the on/off button

to switch off the device. Remove the adapter from the wall socket.

Note: If you did not use the device for a long period of time, it is important to

perform a skin test again.

Two treatment modes: Stamp & Flash and Slide & Flash

-YourPhilips Lumea has two treatment modes for more convenient use

on different body areas:

-The Stamp & Flash mode is ideal to treat small orcurvy areas like knees

and underarms. Simply press and releasethe flash button to release a

single flash.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips BRI947 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips BRI947 Manual

Product: