572
34
Zoom out
Zoom in
Previous page
1/58
Next page
User Manual BDS4223V
32
Explanation of Various Picture Control Settings
Explanation of each available picture control settings are listed in the table below.
Note:
H-Position, H-Size, V-Position and V-Size adjustments are only available in RGB and Component input modes.
CONTRAST
Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast will
make white areas of the video picture brighter. Contrast works in conjuction with Brightness.
BRIGHTNESS
Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow
scenes. Increasing brightness will make dark areas more visible.
COLOR
Use color to adjust the color saturation of the video picture. Increasing color will make the color more
intense. Reducing color setting will make the color less intense.
TINT
Use tint to adjust the color of fleshtones. Increase in the right direction will shift the picture with more
green in appearance. Decreasing setting in left direction will shift the picture with more red in appearance.
SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will
enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.
NOISE REDUCTION
To improve the quality of the picture in the case of poor reception.
COLOR TEMP
Select the color temperature for white balance. There are four settings to choose from: (1) COOL sets to
11000K; (2) NATURAL - sets to 9300K; (3) WARM - sets to 6500D.
FORMAT
Use to change various screen width modes. There are six modes to choose from: (1) 16:9, (2) 4:3, (3)
Panorama, (4) Zoom 1, (5) Zoom 2. See page 28 for more information
IMAGE SHIFT
Use the Image Shift function to prevent image stikking effects when a static image is displayed for a long
period of time. Increase the value to extend the time interval between each image shift operation.
V-SIZE
Use to change vertical size of the picture. Increase to enlarge the picture size in the vertical direction.
Decrease to reduce the picture size in the vertical direction.
V-POSITION
Use to change vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture
down.
H-SIZE
Use to change horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.
Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Use to change horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift
the picture to the left.
CLOCK PHASE
Use clock phase to fine-tune the monitor to perfectly synchronize to the video signal source under RGB
mode.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDS4223V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDS4223V in the language / languages: Dutch as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info