528140
48
Zoom out
Zoom in
Previous page
1/58
Next page
User Manual BDL5571V
47
4. Press the PLUS button to highlight the OFF item. Press the UP/DOWN button to set the hour when
the monitor will be turned off, then press the PLUS button to move to the minute slot to set the minute.
If you do not want to use a power off time, select "__" for the hour slot and minute slot.
5. Press the PLUS button to highlight the Input item, and then press the UP/DOWN button to select an
input source. If no input source is selected, the input source will remain the same as last selected.
6. Press the PLUS button to select what days in a week this schedule item will be take effect, and then
press the SET button.
7. If you want to set up more schedule items, press the EXIT button and then repeat the steps above. A
check mark in the box next to the number of the schedule item indicates that the selected schedule is
in effect.
Notes:
The selection of Every day within a schedule item takes priority over other schedules that are set up to
operate weekly.
When schedule items overlap, scheduled power on time has priority over scheduled power off time.
If there are two schedule items programmed for the same time, then the highest numbered schedule
has priority.
Monitor ID
Set the ID number for controlling the monitor via the RS232C connection. Each monitor must have an
unique ID number when multiple BDL5571V monitors are connected.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to select a
monitor ID.
DDC/CI
Choose to turn On or Off the DDC/CI communication function. Select On for normal use.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
HDMI with EasyLink (One Wire)
This function gives you the ability to control your display through the HDMI connector using
CEC(Consumer Electronics Control) commands.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to make
selection.
Smart power
Set the monitor to reduce the power consumption automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Off Medium
High
Auto signal detection
Choose to let the monitor detect and display available signal sources automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN to make selection.
ON - Set the monitor to display the image automatically once a signal is connected.
OFF - Once a signal is connected, it can only be selected manually.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL5571V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL5571V in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info