528140
45
Zoom out
Zoom in
Previous page
1/58
Next page
User Manual BDL5571V
44
Scan mode
Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and YPbPr inputs only.
Change the display area of the image.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Overscan - Display about 95% of the original size of the image. The rest of the areas surrounding the
image will be cut off.
Underscan - Display the image in its original size.
Scan conversion
Choose to enable or disable the IP (Interlace to Progressive) conversion function.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input
signal will be converted to progressive format for better display quality.
Interlace: Disable the IP function. This mode is suitable for displaying motion pictures, but it increases
the chance of image retention.
Film mode
Choose to turn on or off the film mode frame conversion function.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Auto - Enable the film mode frame conversion function for movies and motion pictures. The monitor
converts a 24 frames-per-second (24 fps) input signal format to DVD video signal format. Once this
function is enabled, it is recommended that you set the Scan conversion function to Progressive.
Off - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and
VCR signals.
IR control
Select the operation mode of the remote control when multiple BDL5571V monitors are connected via
the RS232C connection.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle
between
Normal - All monitors can be operated normally by the remote control.
Primary - Designate this monitor as the primary monitor for remote control operation. Only this monitor
can be operated by the remote control.
Secondary - Designate this monitor as the secondary monitor. This monitor can not be operated by the
remote control, and will only receive the control signal from the primary monitor via the RS232C
connection.
Lock - Lock the remote control function of this monitor. To unlock, press and hold the DISPLAY button
on the remote control for 5 seconds.
Keyboard control
Choose to enable or disable the function of the keyboard (control buttons) on the monitor.
Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to toggle
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL5571V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL5571V in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info