476594
43
Zoom out
Zoom in
Previous page
1/54
Next page
User Manual BDL4771V
RETURN TO THE CONTENTS
HDMI with One Wire
One Wire uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share
functionality between connected devices and the display. To transfer system commands, you need to use an
HDMI cable to connect the display to a device equipped with HDMI CEC. Select On in this menu and you
can operate the main functionalities on your display and the connected device with one remote control. For
instructions on how to use the One Wire function, please refer to the One Wire DFU on the accompanying
CD ROM.
Notes:
• The One Wire-compliant device must be switched on and selected as the source.
• We do not guarantee 100% interoperability with all HDMI CEC devices.
Smart power
Set the display to reduce the power consumption automatically. Setting to High will bring the most power
savings.
Use the UP/DOWN button to toggle between
Auto signal detection
Select to let the unit detect and display available signal source automatically.
On - Set the unit to display the image automatically once a signal is connected.
Off - Once a signal is connected, it can only be selected manually.
Use the UP/DOWN button to make selection.
Settings cloning
Select Monitor to USB or USB to Monitor to transfer all the OSD settings between the display and a USB
flash drive.
Advanced option reset
Reset all settings in the Advanced option menu.
Press the PLUS button to open the submenu, and then press PLUS/MINUS to make selection. Select
Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to
cancel and return to the previous menu.
Off Medium
High
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL4771V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL4771V in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info