476594
39
Zoom out
Zoom in
Previous page
1/54
Next page
User Manual BDL4771V
RETURN TO THE CONTENTS
Progressive - Enable the IP conversion function (recommended). Once enabled, the interlace input signal
will be converted to progressive format for better display quality.
Interlace: Disable the IP function. This mode is suitable for displaying motion pictures, but increases the
chance of image retention.
Film mode
Note: For Component, and HDMI (video mode) inputs only.
Choose to turn on or off the film mode frame conversion function.
Use the UP/DOWN button to toggle between
Auto - Enable the film mode frame conversion function for movies and motion pictures. The display
converts a 24 frames-per-second (24 fps) input signal format into DVD video signal format. Once this
function is enabled, we recommend that you set the Scan conversion function to Progressive.
Off - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR
signals.
IR control
Select the operation mode of the remote control when multiple BDL4771V units are connected via RS-232C
cables.
Use the UP/DOWN button to toggle between
Normal - All units can be operated normally by the remote control.
Primary - Designate this display as the primary unit for remote control operation. Only this display will be
operated by the remote control.
Secondary - Designate this display as the secondary unit. This display can not be operated by the remote
control, and will only receive the control signal from the primary unit via the RS-232C connection.
Lock - Lock the remote control function of this display. To unlock, press and hold the DISPLAY button
on the remote control for 5 seconds.
IR out
Select Enable to operate multiple units with one IR remote control. Point the remote control to the first
display which IR OUT port connects to the second display’s IR IN port, and the second display’s IR OUT port
connects to the third display’s IR IN port, and so on.
Remote control selection
Select IR or RF according to the remote control you wish to use. You can use the RF remote to control
multiple BDL4771V units in a video wall.
Keyboard control
Choose to enable or disable the function of the keyboard (control buttons) on the display.
Use the UP/
DOWN button to toggle between
Lock - Disable the keyboard.
Unlock - Enable the keyboard.
Tiling
Note: This function is not available when PIP is turned on. Disable PIP to make Tiling accessible from the OSD menu.
With this function you can create a single large screen matrix (display wall) that consists of up to 150
BDL4771V displays (10 units on the vertical side and 15 units on the horizontal side).
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips BDL4771V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips BDL4771V in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info