213462
30
Zoom out
Zoom in
Previous page
1/34
Next page
User Manual BDL3231/BDL4231
6. INPUT MODE
VGA Resolution
Standard
Resolution
Active Resolution
Refresh Rate Pixel Rate Aspect Ratio Stand for Mode
H Pixels V Lines
VGA 640 480
60 Hz 25.175 MHz
4:3 Video Graphic Array
72 Hz 31.5 MHz
75 Hz 31.5 MHz
WVGA 848 480 60 Hz 33.75 MHz 16:9
Wide Video Graphic
Array
SVGA 800 600
60 Hz 40 MHz
4:3 Super VGA
72 Hz 50 MHz
75 Hz 49.5 MHz
XGA 1024 768
60 Hz 65 MHz
4:3
Super VGA Extended
Graphic Array
70 Hz 75 MHz
75 Hz 78.5 MHz
WXGA 1360 768 60 Hz 84.75 MHz 16:9 Wide XGA
SDTV Resolution
Standard
Resolution
Active Resolution
Refresh Rate Pixel Rate Aspect Ratio Stand for Mode
H Pixels V Lines
480i
720 480
29.97 Hz 13.5 MHz
4:3
Modified NTSC Standard
480p 59.94 Hz 27 MHz
576i
720 576
25 Hz 13.5 MHz
4:3 Modified PAL Standard
576p 50 Hz 27 MHz
HDTV Resolution
Standard
Resolution
Active Resolution
Refresh Rate Pixel Rate Aspect Ratio Stand for Mode
H Pixels V Lines
720p 1280 720
50 Hz
74.25 MHz 16:9 Normally DVB Mode
60 Hz
1080i 1920 1080
25 Hz
74.25 MHz 16:9 Normally ATSC Mode
30 Hz
RETURN TO THE CONTENT
S
• The PC text quality is optimum in WXGA mode (1360 x 768, 60Hz).
• When this LCD is used as a PC display, 24-bit color is supported (over 16.7 million colors).
• Your PC display screen might appear different depending on the manufacture (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a display.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some
cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC
is disconnected). If so, press the INPUT button to enter the video mode. Also, make sure that the PC is connected.
• When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable
connections.
• The display settings table complies to the IBM/VESA standards, and based on the analog input.
• The DVI support mode is regarded as same to the PC support mode.
• The best timing for the vertical frequency to each mode is 60Hz.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips bdl4231c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips bdl4231c in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info