Manual Philips babyphone model 469 (page 8 of 188) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

368355

Zoom out

Zoom in

1/188

Mains operation

1 Put the small plug in the socket on the baby unit and insert the adapter in a wall socket.

(Fig. 3)

Battery operation

The baby unit runs on four 1.5-volt R6 AA batteries (not included). We strongly advise you to use

Philips LR6 PowerLife batteries.

Make sure your hands and the unit are dry when you insert the batteries.

1 Undo the screw of the battery compartment lid with a screwdriver and remove the lid.

(Fig. 4)

2 Insert four 1.5V AA batteries.

Make sure the + and - poles of the batteries point in the right direction.

3 Put the battery compartment lid back on the appliance and fasten the screw with a

screwdriver. (Fig. 5)

Note:Do not mix old and new batteries.

Note:Remove the batteries if you do not intend to use the baby unit for a month or more.

Note:If the batteries are in the unit when you operate it on mains power, check them for leakage every

six months.

Note:When the batteries are low, the battery symbol

à on the display and the power light blink. When

the batteries are empty, the power light and the display do not go on at all.

Parent unit

The parent unit has a rechargeable battery pack and can be recharged in the charger. When the

battery pack is fully charged, you can use the parent unit cordlessly for up to 12 hours.

1 Put the small plug into the socket of the charger and put the adapter in a wall socket. (Fig. 6)

2 Place the parent unit in the charger. (Fig. 7)

The charging light starts to burn red.

3 Leave the parent unit in the charging base until the battery pack is fully charged.

It takes at least 14 hours to charge the battery pack fully.

The charging light burns red as long as the parent unit is in the charger, even when the battery

pack is fully charged.

Note:When the battery pack is low, the power light and SYSTEM CHECK light blink. When the power

light and SYSTEM CHECK light do not go on at all, the battery pack is empty.

Note:You can also leave the parent unit in the charger to run it from the mains.

Preparing for dial-up mode

Baby unit

1 Follow the instructions above to prepare the baby unit for mains operation.

2 Insert one connector of the telephone cable supplied in the appropriate plug. Insert the plug

in the wall telephone socket.

3 Insert the other connector of the telephone cable into the phoneline-in socket of the baby

unit. (Fig. 8)

If you want your telephone to work while the baby unit is in dial-up mode, insert the cable of

the telephone in the phoneline-out socket of the baby unit.

ENGLISH8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips babyphone model 469 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips babyphone model 469 Manual

Product: