215263

Philips b sure xg2 brilliance xga Manual

34
Zoom out
Zoom in
Previous page
1/34
Next page
General:
• Check that the batteries are installed properly in the remote control and/or replace the
batteries.
• Check that the projector receives the signals from the remote control.
• Check that the USB cable or PS/2 cable has been properly connected.
• Check that both projector and computer are switched on.
• Unplug the USB cable or PS/2 cable and then reconnect.
In case of PS/2 connection:
– The PS/2 mouse of the connected laptop has priority over the projector mouse loop through
connection.
• Disable the PS/2 mouse of the laptop by selecting ‘Disable in hardware profile’ in the
‘Windows Mouse Properties’ of the laptop.Then restart ‘Windows’ on the laptop.
The projector mouse loop through connection now has priority while the laptop mouse can
still be used.
• Switch off all devices and then reconnect while you make sure that you:
• connect the PS/2 cable to PC and projector before switching on the PC;
• switch on the projector before switching on the PC;
• do not connect the USB cable when making the PS/2 connection.
• Also refer to the User Guide or support information of your computer.
In case of USB connection:
• Connect another USB device (mouse, scanner, webcam, etc.) and see if it works.
If it does not work there is a problem with the computer.
• Also refer to the User Guide or support information of the computer.
–‘Windows’ did not manage to install the driver correctly. In this case the ‘Device manager’ will
contain a catagory ‘Other devices.
• Disconnect the projector.
• Remove all items listed under ‘Other devices’ in the ‘Device manager’.
• Restart the computer.
• Reconnect the projector.
• In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied
with the projector.
• In case the computer asks for a USB-device driver, install the required drivers on the
CD-ROM supplied with the computer.
– The size of the image exceeds 128 Kb.
• Reduce the size of the capture window.
• Select another image.
The mouse cursor does
not react when using the
cursor control on the
remote control
Computer asks for drivers
Image for personal start-
up screen cannot be
loaded
Philips Multimedia Projector 34 English User guide bSure1 / bSure 2
7.Troubleshooting <
… 34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips b sure xg2 brilliance xga at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips b sure xg2 brilliance xga in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info