Manual Philips-Avent SCD600 (page 13 of 164) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

507144

Zoom out

Zoom in

1/164



This chapter lists the questions most frequently asked about the appliance. If you cannot nd the

answer to your question, contact the Consumer Care Centre in your country.

Question Answer

Why don’t the power-on

light of the baby unit and

the parent unit go on

when I switch on the

units?

Perhaps the rechargeable battery of the parent unit is empty and the

parent unit is not connected to the mains. Insert the appliance plug

into the parent unit and put the adapter in a wall socket. Then move

the volume wheel in the ‘ON’ direction to switch on the parent unit

and to establish connection with the baby unit.

Perhaps the baby unit is not connected to the mains and the non-

rechargeable batteries in the baby unit are empty or there are no

non-rechargeable batteries in the baby unit at all. Put full non-

rechargeable batteries in the baby unit or connect the baby unit to

the mains. Then set the on/off switch to ‘ON’ to switch on the baby

unit and to establish connection with the parent unit.

Why does the LINK light

on the parent unit ash

red?

The baby unit and the parent unit are out of range of each other.

Move the parent unit closer to the baby unit.

The baby unit may be switched off. Switch on the baby unit.

Why does the battery/

power-on light on the

parent unit ash green?

The rechargeable battery of the parent unit is running low. Recharge

the battery (see chapter ‘Preparing for use’).

Why does the parent

unit beep?

If the parent unit beeps while the LINK light lights up red continuously,

the connection with the baby unit is lost. Move the parent unit closer

to the baby unit.

The baby unit may be switched off. Switch on the baby unit.

Why does the video

monitor produce a high-

pitched noise?

The units may be too close to each other. Make sure the parent unit

and the baby unit are at least 1 metre/3 feet away from each other.

The volume of the parent unit may be set too high. Decrease the

volume of the parent unit.

Why don’t I hear a

sound/Why can’t I hear

my baby cry?

The volume of the parent unit may be set too low or may be

switched off. Turn the volume wheel to a higher volume level.

Perhaps you have switched on the automatic screen activation. If the

automatic screen activation is activated, the video display only

switches on when the baby unit picks up a sound. As long as no

sound is detected, the video display is off to save power.

Why does the parent

unit react too quickly to

other sounds?

The baby unit also picks up other sounds than those of your

baby. Move the baby unit closer to the baby (but observe the

minimum distance of 1 metre/3 feet).

 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD600 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips-Avent SCD600 Manual

Product: