535116

Philips-Avent SCD560 Manual

10
Zoom out
Zoom in
Previous page
1/112
Next page
Activating Eco Max mode
1 Select ‘Eco Max’ in the menu with the + and - buttons and press OK to conrm.
2 When the display shows ‘Turn On’, press OK to switch on the Eco Max mode.
3 The warning message ‘No alert if out of range, OK’ appears on the display. Press OK to
conrm.
Note: The warning message scrolls across the display twice. If you do not press OK, the parent unit leaves
the menu and the Eco Max mode remains off.
, The Eco Max indication ashes on the display and the ‘link’ light ashes green slowly (Fig. 12).
, When the parent unit receives a DECT signal from the baby unit because the baby makes a
sound, the ‘link’ light turns solid green.
Deactivating Eco Max mode
1 Press the MENU button
2 Use the + and - buttons to select ‘Eco Max’ and press OK to conrm.
3 When the display shows ‘Turn Off’, press OK to conrm.
Nightlight
1 To switch the nightlight on the baby unit on, select ‘Nightlight’ in the menu with the + and
- buttons and press OK to conrm.
2 Press OK to choose ‘Turn On’. The nightlight symbol Q appears on the display.
3 When the nightlight is on and you want to switch it off, press OK to choose ‘Turn Off’.
The nightlight symbol Q disappears from the display.
Lullaby
1 To play one or more lullabies on the baby unit, select ‘Lullaby’ in the menu with the + and
- buttons. Press OK to conrm.
2 Press OK again to play the rst lullaby. Use the + and - buttons to select one of the lullabies
or ‘Play all’.
, The display shows the lullaby symbol and the number of the lullaby that is playing. The
selected lullaby repeats continuously for 15 minutes, unless you select ‘stop’ in the menu.
, If you select ‘Play all’, all pre-stored lullabies are played for 15 minutes. The display shows the
number of the lullaby that is playing.
3 To stop playing, select ‘Stop’ in the menu and press OK to conrm.
Feed timer
You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from
1 minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select ‘Feed Timer’ in the menu. Press OK to conrm.
2 Select ‘Set Timer’ in the feed timer submenu. Press OK to start setting the timer.
3 Set the hour and the minutes press OK to conrm.
4 To start the feed timer, select ‘xx:xx Start’ in the feed timer submenu. Press OK to conrm.
The timer symbol appears on the display and the timer starts counting down (Fig. 13).
5 When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
ashing on the display and the message ‘TIMER END’ scrolls across the display (Fig. 14).
6 To stop the timer, select ‘Stop & Reset’ in the feed timer submenu and press OK to conrm.
ENGLISH10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD560 in the language / languages: All languages as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info