Manual Philips-Avent SCD535 (page 13 of 216) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

507143

Zoom out

Zoom in

1/216

5 If the alert is off, the display shows ‘On?’. Press

the OK button to switch on the alert. If the

alert is on, the display shows ‘Off?’. Press the

OK button to switch off the alert.

• If you have set the sound alert to ‘on’, the

sound alert symbol ( g) appears on the

display of the parent unit.

7.7 Setting room temperature

range

D Note:

You can only adjust the temperature range in the

menu of the parent unit.

A baby will sleep comfortably in a room heated

to a temperature between 16°C and 20°C. This is

important, since a baby cannot regulate its body

temperature as well as an adult. A baby needs

more time to adjust to temperature changes.

If you do not set a temperature range, the baby

monitor alerts you when the temperature in your

baby’s room drops below 14°C or rises above

35°C. In this case, the backlight of the parent unit

display goes on and ‘High’ or ‘Low’ appears on

the display. To change the default minimum and

maximum temperature, follow the instructions

below.

Note:

The temperature of the baby’s room is shown on

the display of both units when they are linked.

1 Select ‘Temperature’ with the + and - buttons.

2  

3 Select ‘Range’ with the + and - buttons.

4  

5 Set the desired minimum temperature with

the + and - buttons.

6  

7 Set the desired maximum temperature with

the + and - buttons.

8  

• The message ‘Saved’ appears on the display.

7.5 Adjusting microphone

sensitivity

D Note:

You can only adjust the microphone sensitivity in

the menu of the parent unit.

You can set the microphone sensitivity of the

baby unit to the desired level. You can only change

the microphone sensitivity when a connection

between the baby unit and the parent unit has

been established, i.e. when the LINK light on the

parent unit lights up green continuously.

1 Select ‘Sensitivity’ with the + and - buttons.

2  

3 Select the desired microphone sensitivity

level for the baby unit with the + and -

buttons. (Fig. 24)

1 Minimum sensitivity level

2 Maximum sensitivity level

4  

• The message ‘Saved’ appears on the display.

Note:

When the microphone sensitivity of the baby unit

is set to a high level, it picks up more sounds and

therefore transmits more often. As a result, the

units consume more power and the operating

time of the battery is shorter.

7.6 Sound alert on/off

D Note:

You can only switch the sound alert on and off in

the menu of the parent unit.

This feature allows you to monitor your baby silently.

It enables you to switch off the volume on your

parent unit and still be alerted if your baby cries.

If the sound alert is switched on, the parent unit

beeps as soon as the fourth sound level light lights

up while the volume is switched off. In addition, the

backlight of the parent unit display goes on and the

sound alert symbol ( g

1 Select ‘Alert settings’ with the + and - buttons.

2  

3 Select ‘Sound alert’ with the + and - buttons.

4  

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD535 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips-Avent SCD535 Manual

Product: