685640

Philips-Avent SCD503 Manual

11
Zoom out
Zoom in
Previous page
1/152
Next page
11
Whyistheconnectionlostoraretheresound
interruptionseverynowandthen?
• The baby unit and the parent unit are probably
close to the outer limits of the operating
range. Try a different location or decrease the
distance between the units. Please note that
it takes about 30 seconds each time before a
connection between the units is established.
• You may have placed the unit next to a
transmitter or other DECT appliance, such as
a DECT telephone or other 1.8GHz/1.9GHz
baby monitor. Move the unit away from the
other appliances until the connection is re-
established.
Ismybabymonitorsecurefromeavesdropping
andinterference?
• The DECT technology of this baby monitor
guarantees no interference from other
equipment and no eavesdropping.
Whydothebatteriesoftheparentunitrunlow
sofastwhenIusetheunitonbatteries?
• The operating time on batteries may be up
to 24 hours, but this depends on the type of
batteries and how often and how long you use
the parent unit on batteries. Please note that
the batteries are not charged when the parent
unit is connected to the mains. Plug in the
parent unit when a wall socket is available close
by to save battery power.
• Make sure you use 1.5V R6 AA alkaline
non-rechargeable batteries or charged 1.2V
R6 AA rechargeable batteries. Recharge the
rechargeable batteries in a separate battery
charger.
CanIusethebabyunitonbatteries?
• No, you cannot use the baby unit on batteries.
The baby unit can only be used on mains
power.
Whydoestheparentunitbeep?
• If the parent unit beeps while the ‘link’ light
ashes red continuously, the connection with
the baby unit is lost. Move the parent unit closer
to the baby unit or switch on the baby unit if it
was off.
• The baby unit may be switched off. Switch on
the baby unit.
Whydoestheapplianceproduceahigh-pitched
noise?
The units may be too close to each other. Make
sure the parent unit and the baby unit are at least
1 metre/3.5 feet away from each other.
Whydon’tIhearasound/Whycan’tIhear
mybabycry?
• The baby unit and the parent unit may be out
of range of each other. Reduce the distance
between the units.
• You may have set the volume to the lowest
level (mute). Increase the volume.
Whydoestheparentunitreacttooquicklyto
othersounds?
• The baby unit also picks up other sounds than
those of your baby. Move the baby unit closer
to the baby (but observe the minimum distance
of 1 metre/3.5 feet).
Thespeciedoperatingrangeofthebaby
monitoris300metres/985feet.Whydoesmy
babymonitormanageamuchsmallerdistance
thanthat?
• The specied range is only valid outdoors in
open air. Inside your house, the operating range
is limited by the number and type of walls and/
or ceilings in between. Inside the house, the
operating range is up to 50 metres/150 feet.
ENGLISH
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD503 in the language / languages: English as an attachment in your email.

The manual is 13,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info