507139
8
Zoom out
Zoom in
Previous page
1/86
Next page
10
7 Troubleshooting
If you don’t nd the solution you need in this section, you can get support at www.philips.com/AVENT
or contact the Philips Consumer Care Center in your country.
Problems Possible causes Solutions
My parent/baby unit doesn’t
switch on.
The unit is not connected to the
power supply.
Connect the unit to a power
supply.
The batteries are empty or
inserted incorrectly.
Replace the batteries and make
sure that they are correctly
inserted.
I cannot establish a connection. The parent and baby units are
set to different channels.
Set the units to the same
channel.
The units are out of range. Move the units closer (see
‘Operating range’ on page 9).
The parent unit makes a high
pitched noise.
The units are too close. Move the parent unit farther
away from the baby unit.
Lower the volume of the parent
unit.
I get interference. I can only hear
intermittently.
The parent unit picks up signals
from other appliances or baby
monitors.
Move the parent unit away from
other electrical appliances, like
microwaves or telephones.
Change the units to the other
channel.
The units are out of range. Move the units closer.
The parent and baby units are
set to different channels.
Set the units to the same
channel.
The batteries for the parent and/
or baby are running low.
Connect the parent and/or baby
units to a power supply. Replace
the batteries.
I cannot hear anything through
my parent unit.
The volume of parent unit is set
too low or is muted.
Increase the volume of parent
unit.
The units are out of range. Move the units closer.
The operating range of mine is
less than 150 metres/500 feet.
Environmental obstructions
affect the operating range.
Move the units closer.
The batteries in the parent unit
run low quickly.
The volume is set too high and
the unit consumes more power.
Decrease the volume.
Tip
Product information is subject to change without prior notice.
EN
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SCD485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SCD485 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info