507395
35
Zoom out
Zoom in
Previous page
1/40
Next page
33
OPLOSSEN VAN PROBLEMEN
Oplossing
Giet een beetje water uit de
binnenhouder.
Giet een beetje water uit de
binnenhouder.
Laat de fles nog enkele seconden in de
houder staan nadat het indicatielampje is
uitgegaan, of stel het apparaat in op een
hogere temperatuur.
Stel het apparaat in op een lagere
temperatuur.
Haal de fles eruit wanneer het
indicatielampje uitgaat.
Roer de inhoud van tijd tot tijd tijdens
het opwarmen. Controleer of de
klikregelknop in de stand “ ” (POTJE)
staat.
Zorg dat er minstens 15 minuten zit
tussen twee opeenvolgende keren dat u
het apparaat gebruikt zodat de
stroomveiligheid zich kan terugstellen.
Dit is normaal; het kan aan- of uitgaan
tijdens het opwarmen.
Scherm het indicatielampje af van
omgevingslicht zodat u beter kunt zien
dat het lampje brandt.
Aanslag door hard water is normaal en
kan erger worden als uw leidingwater
erg hard is; verwijder de aanslag van tijd
tot tijd met witte azijn (zie Onderhoud).
Probleem
Te ver gevuld met water.
Fles blijft drijven.
Temperatuur is te laag.
Temperatuur is te hoog.
Het potje voeding is niet
goed opgewarmd.
Apparaat wil niet
opwarmen.
Indicatielampje gaat aan en
uit tijdens het warm
houden.
Indicatielampje lijkt niet te
branden.
Er zitten vlekken op de
bodem van het reservoir.
44
INSTRUÇÕES DE MANUTENÇÃO
Limpeza
Desligue o Aquecedor de Biberões da tomada de corrente (ou do isqueiro)
e deixe arrefecer. Limpe o recipiente e o exterior do Aquecedor de Biberões
com um pano húmido.
Nunca mergulhe o Aquecedor de Biberões em água. Não use agentes de
limpeza ou polimento.
Os depósitos de água dura deverão ser removidos. Para tal, use apenas
vinagre branco. Verta o vinagre no tanque até meio e deixe repousar até
que os depósitos de água dura tenham sido completamente eliminados.
Enxagúe bem e seque com um pano húmido.
Aviso:
Se ocorrer uma avaria, consulte o seu centro de assistência técnica
Philips.
Nunca deverá tentar reparar o Aquecedor de Biberões por si próprio;
não desmonte a unidade
As operações de reparação só deverão ser efectuadas por pessoal de
assistência técnica qualificado.
ESPECIFICAÇÕES TÉCNICAS
Modelo SBC SC205
Fonte de alimentação : 220-240V CA
Consumo de potência : 100 watts
Temperatura ambiente de funcionamento : entre +7ºC e +37ºC
Protecção : sistema de aquecimento controlado
pela temperatura PTC
Modelo SBC SC215
Fonte de alimentação (corrente) : 220-240V CA
Consumo de potência (corrente) : 90 watts
Fonte de alimentação (bateria de automóvel) : 12V DC
Consumo de potência (bateria de automóvel) : 80 watts
Temperatura ambiente de funcionamento : entre +7ºC e +37ºC
Protecção : sistema de aquecimento controlado
pela temperatura PTC
Os dois modelos cumprem a directiva de baixa tensão da CE 73/237/
EEC e EMC (89/336/EEC).
ifusc205EURbk.p65 16/05/2001, 11:5733
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips-Avent SBCSC230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips-Avent SBCSC230 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info