GENERAL
If you wish to use the alarm, first set the alarm time.
There is a choice of two alarm modes, buzzer or radio. The
display shows the alarm indicator if the alarm is set.
1.
Adjust the clock control to SET ALARM.
2.
Press and hold down the HR or MIN key to set and adjust
the hours and minutes respectively:
• With your finger held down on HR, the hour increases as a
digit from 0 to 23.
• With your finger held down on MIN, the minutes increases
as a digit from 00 to 59.
• -- If both the HR and MIN keys are pressed simultaneously,
the alarm time display will be reset to 0:00.
3.
Release the HR or MIN key when you have reached the
correct time.
4.
Adjust the clock control to CLOCK to return to clock time.
• To review your set alarm time, adjust the clock control to
SET ALARM.
5.
To select the alarm mode you wish to be awoken by, set
ALARM to RADIO or BUZZER.
• If you have selected the radio mode, make sure you have
adjusted the volume loud enough to wake you up!
• The buzzer alarm begins gently and gradually increases to a
fixed maximum volume.
SWITCHING OFF THE ALARM
There are three ways of switching off the alarm. Unless you
choose to cancel the alarm completely, the 24HOUR ALARM
RESET option will be automatically selected after 1 hour and
59 minutes from the time your alarm time first goes off.
24HR ALARM RESET
If you want the alarm mode to be stopped immediately but
also wish to repeat the alarm call at the same time for the
following day:
• Press 24HOUR ALARM RESET during the alarm call.
REPEAT ALARM
This will repeat your alarm call at 8-9 minute intervals.
• During the alarm call, press
SLEEP OFF /REPEAT ALARM.
• Press SLEEP OFF /REPEAT ALARM again during the next call
if you wish to repeat the alarm call.
• If, however, you do not press SLEEP OFF /REPEAT ALARM
again, the alarm will sound for 1 hour and 59 minutes
before turning itself off. Your alarm time setting will then
automatically enter the 24HOUR ALARM RESET mode to
sound at the same time next day.
8
SETTING THE ALARM
English
