545877
16
Zoom out
Zoom in
Previous page
1/124
Next page
Audio Out Offset
If you cannot set a delay on the Home Theatre System, you can
set the TV to sync the sound. You can set an offset that
compensates for the time necessary for the Home Theatre
System to process the sound of the TV picture. You can set the
value in steps of 5ms. Maximum setting is -60ms.
The Audio Out Delay setting should be switched on.
To synchronise the sound on the TV…
1 - Press
and press
(left) for
Setup
.
2 - Click
Sound
>
Advanced
and click
Audio Out Offset
.
3 - Use the slider bar to set the sound offset and press
OK
.
4 - Press
BACK
repeatedly if necessary, to close the menu.
Audio Out Format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby
Digital, DTS® or similar, set the Audio Out Format to
Multichannel. With Multichannel, the TV can send the
compressed multichannel sound signal from a TV channel or
connected player to the Home Theatre System. If you have a
Home Theatre System without multichannel sound processing,
select Stereo.
To set the Audio Out Format…
1 - Press
and press
(left) for
Setup
.
2 - Click
Sound
>
Advanced
and click
Audio Out Format
.
3 - Click
Multichannel
or
Stereo
.
4 - Press
BACK
repeatedly if necessary, to close the menu.
Audio Out Levelling
Use the Audio Out Levelling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
To level the difference in volume…
1 - Press
and press
(left) for
Setup
.
2 - Click
Sound
>
Advanced
and click
Audio Out Levelling
.
3 - If the volume difference is large, select
More
. If the volume
difference is small, select
Less
.
4 - Press
BACK
repeatedly if necessary, to close the menu.
Audio Out Levelling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted. This noise is heard when the audio
or video file has DTS sound but the Home Theatre System has
no DTS sound processing. You can fix this by setting the
Audio
Out Format
of the TV to
Stereo
.
Press
for
Setup
>
Sound
>
Advanced
>
Audio Out Format
.
No sound
If you cannot hear the sound from the TV on your Home
Theatre System, check if you connected the HDMI cable to
an
HDMI ARC
connection on the Home Theatre System. All
HDMI connections on the TV are HDMI ARC connections.
4.7
Blu-ray Disc Player
Use a
High speed HDMI
cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
In Help, press the colour key
Keywords
and look up
EasyLink HDMI CEC
for more information.
4.8
DVD Player
Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUS9109 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUS9109 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUS9109

Philips 65PUS9109 User Manual - German - 134 pages

Philips 65PUS9109 User Manual - Dutch - 100 pages

Philips 65PUS9109 User Manual - French - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info