615441
17
Zoom out
Zoom in
Previous page
1/127
Next page
Connect with HDMI
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
For more information, press the colour
key
Keywords and look up Audio to Video Sync.
Audio Out Settings
Audio Out Delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically and always
correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio Out Delay on the
TV.
To switch off the Audio Out Delay…
1 - Press
SETTINGS, select All Settings and press
OK.
2 - Select Sound and press
(right).
3 - Select Advanced > Audio Out Delay and press
OK.
4 - Select Off and press OK.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Audio Out Offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms.
The Audio Out Delay setting should be switched on.
To synchronise the sound on the TV…
1 - Press
SETTINGS, select All Settings and press
OK.
2 - Select Sound and press
(right).
3 - Select Advanced > Audio Out Offset and press
(right).
4 - Press
(up) or
(down) to adjust the value.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Audio Out Format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio Out
Format to Multichannel. With Multichannel, the TV
can send the compressed multichannel sound signal
from a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set the Audio Out Format…
1 - Press
SETTINGS, select All Settings and press
OK.
2 - Select Sound and press
(right).
3 - Select Advanced > Audio Out Format and
press OK.
4 - Select Multichannel or Stereo and press OK.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Audio Out Levelling
Use the Audio Out Levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume…
1 - Press
SETTINGS, select All Settings and press
OK.
2 - Select Sound and press
(right).
3 - Select Advanced > Audio Out Levelling and
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUS8901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUS8901 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUS8901

Philips 65PUS8901 Additional guide - English - 2 pages

Philips 65PUS8901 Additional guide - German - 2 pages

Philips 65PUS8901 User Manual - German - 119 pages

Philips 65PUS8901 Additional guide - Dutch - 2 pages

Philips 65PUS8901 User Manual - Dutch - 112 pages

Philips 65PUS8901 Additional guide - French - 2 pages

Philips 65PUS8901 User Manual - French - 119 pages

Philips 65PUS8901 Installation Guide - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info