608901
86
Zoom out
Zoom in
Previous page
1/128
Next page
7 - Select Finish and press OK to store the channels
and radio stations.
Remove a Satellite
You can remove one or more satellites from your
current satellite installation. You remove the satellite
and its channels. Some satellite operators do not
allow removing a satellite.
To remove satellites…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Satellite Installation and press OK.
3 - Select Search for Satellites and press OK.
4 - Select Remove Satellite and press OK. The
current satellites are shown.
5 - Select a satellite and press OK to mark or unmark
them to remove.
6 - Press
(left) to go back one step or press
BACK to close the menu.
Manual Installation
Manual Installation is intended for expert users.
You can use Manual Installation to test the signal
strenght of an LNB. You can test the signal through
each tuner individually, tuner 1 (Sat 1) or tuner 2 (Sat
2).
Alternatively, you can use Manual Installation to
quickly add new channels from a satellite
transponder. You can only add channels on tuner 1
(Sat 1). To add channels, you need to know the
frequency and polarization of the transponder. The
TV will install all channels of that transponder. If the
transponder was installed before, all its channels -
the former and the new ones - are moved to the end
of the channel list All.
You cannot use Manual installation if you need to
change the number of satellites. If this is needed, you
have to do a complete installation with Install
Satellites.
To test an LNB or store channels from a transponder…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Satellite Installation and press OK.
3 - Select Manual Installation and press OK.
4 - Select Tuner and press OK.
5 - Select the tuner you want to test and press OK.
6 - If you have more than 1 satellite installed, select
the satellite/LNB for which you want to test or add
channels and press OK.
7 - Select Polarization and press OK. Select the
polarization you need and press OK.
8 - If you set the Symbol Rate Mode to Manual, you
can enter the symbol rate in Symbol Rate manually.
9 - Select Search and press OK. The signal strenght
is shown on screen.
10 - If you want to store the channels of a new
transponder, select Store and press OK.
11 - Press
(left) to go back one step or press
BACK to close the menu.
Homing Transponder and LNB
In some countries, you can adjust the expert settings
for homing transponder and each LNB. Only use or
change these settings when a normal installation fails.
If you have non-standard satellite equipment, you
can use these settings to overrule the standard
settings. Some providers might give you some
transponder or LNB valeus which you can enter here.
LNB Power
By default, LNB Power is set to On.
22 kHz Tone
By default, the Tone is set to Auto.
Low LO Frequency / High LO Frequency
The local oscillator frequencies are set to standard
values. Adjust the values only in case of exceptional
equipment that needs different values.
Problems
The TV cannot find the satellites I want or the TV
installs the same satellite twice
• Make sure that the correct number of satellites is set
in Settings at the start of the installation. You can set
the TV to search for One, Two or 3/4 satellites.
A dual head LNB cannot find a second satellite
• If the TV finds one satellite but cannot find a second
one, turn the dish a few degrees. Align the dish to get
the strongest signal on the first satellite. Check the
signal strength indicator of the first satellite on screen.
With the first satellite set at the strongest signal, select
Search again to find the second satellite.
• Make sure the settings are set to Two Satellites.
Changing the installation settings did not solve my
problem
• All settings, satellites and channels are only stored
at the end of the installation when you finish.
All satellite channels are gone
• If you use a Unicable system, make sure you
assigned two unique user band numbers for both
built-in tuners in the Unicable settings. It might be
that another satellite receiver in your Unicable system
is using the same user band number.
86
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUS8601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUS8601 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUS8601

Philips 65PUS8601 User Manual - German - 120 pages

Philips 65PUS8601 User Manual - Dutch - 113 pages

Philips 65PUS8601 User Manual - French - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info