608901
74
Zoom out
Zoom in
Previous page
1/128
Next page
Light Sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, together with
Ambilight, to the lighting conditions of the room.
To activate the light sensor…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Light Sensor and press OK. When the
Light Sensor is activated, the setting is marked with
a
(leave).
4 - Press
(left) to go back one step or press
BACK to close the menu.
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Eco Settings and press OK.
3 - Select Switch Off Timer and press
(right).
4 - Press
(up) or
(down) to adjust the value.
The value 0 (Off) deactivates the automatic switch
off.
5 - Press
(left) to go back one step or press
BACK to close the menu.
21.6
General Settings
Philips Logo Brightness
You can switch off or adjust the brightness of the
Philips logo on the front of the TV.
To adjust or switch off…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Philips Logo Brightness and press OK.
4 - Select Maximum, Medium, Minimum or Off and
press OK.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Home or Shop
If you use the TV at home, set the location to Home. If
you use the TV in a shop, set the location to Shop. In
location Shop, the Picture Style is set to Vivid
automatically. The automatic Switch Off Timer is
switched off.
To set the TV location…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Location and press OK.
4 - Select Home or Shop and press OK.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Shop Setup
If the TV is set to Shop, some settings were set
automatically. You can change these shop settings in
Shop Setup.
To set the Shop Setup…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select General Settings and press OK.
3 - Select Shop Setup and press OK.
4 - Change the settings according to your
preference.
5 - Press
(left) to go back one step or press
BACK to close the menu.
Demo Me
To present the picture and sound quality of this TV,
you can play a stored video clip.
To play the demonstration video clip…
1 - Press
.
2 - Select Demo Me and press OK. The video clip will
start playing.
You can use this video clip to check on the picture
and sound quality of the TV. The TV switches to the
factory settings when playing the video clip.
74
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUS8601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUS8601 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUS8601

Philips 65PUS8601 User Manual - German - 120 pages

Philips 65PUS8601 User Manual - Dutch - 113 pages

Philips 65PUS8601 User Manual - French - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info