608901
26
Zoom out
Zoom in
Previous page
1/128
Next page
5
Switching On and
Off
5.1
On, Standby or Off
Before you switch on the TV, make sure you plugged
in the mains power in the POWER connector on the
back of the TV.
To put the TV on standby when the indicator light is
off, press the small joystick key on the back of the TV.
The indicator will light up.
With the TV on standby, press
on the remote
control to switch the TV on. Alternatively, press
HOME.
Switch back to standby
To switch the TV to standby, press
on the remote
control.
Switch Off
To switch the TV Off, press the joystick key. The
indicator light goes off.
The TV is still connected to the mains power but
consumes very little energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Philips Logo Brightness
You can switch off or adjust the brightness of the
Philips logo on the front of the TV.
To adjust or switch off…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select General Settings and select Philips Logo
Brightness.
3 - select Maximum, Medium, Minimum or
select Off to switch off the lighting of the logo.
4 - Press
(left) to go back one step or press
BACK to close the menu.
5.3
Keys on TV
If you lost the remote control or its batteries are
empty, you can still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key on
the back of the TV to bring up the basic menu.
2 - Press left or right to select
Volume,
Channel or
Sources. Select
Demo, to start a
demo movie.
3 - Press up or down to adjust the volume or tune to
the next or previous channel. Press up or down to go
through the list of sources, including the tuner
selection. Press the joystick key to start the demo
movie.
4 - The menu will disappear automatically.
To switch the TV off, select
and press the joystick
key.
5.4
Sleep Timer
With the Sleep Timer, you can set the TV to switch to
Standby automatically after a preset time.
To set the Sleep Timer…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select General Settings, select Sleep Timer and
press
(right). With the slider bar you can set the
time to up to 180 minutes in increments of 5 minutes.
If set to 0 minutes, the Sleep Timer is switched off.
You can always switch off your TV earlier or reset the
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUS8601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUS8601 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUS8601

Philips 65PUS8601 User Manual - German - 120 pages

Philips 65PUS8601 User Manual - Dutch - 113 pages

Philips 65PUS8601 User Manual - French - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info