590894
55
Zoom out
Zoom in
Previous page
1/114
Next page
To adjust Ambilight+hue immersion...
1 - Press
, select All Settings and press OK.
2 - Select Ambilight and press
(right) to enter
the menu.
3 - Select Ambilight+hue > Immersion, and
press OK.
4 - Press the arrows
(up) or
(down) to adjust
the value.
5 - Press
(left) repeatedly if necessary, to close
the menu.
View Configuration
With View Configuration, you can view current setup
of the Ambilight+hue, network, the Bridge and bulbs.
To view Ambilight+hue configuration...
1 - Press
, select All Settings and press OK.
2 - Select Ambilight and press
(right) to enter
the menu.
3 - Select Ambilight+hue > View Configuration,
and press OK.
4 - Select Off, then press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
Reset Configuration
To reset Ambilight+hue...
1 - Press
, select All Settings and press OK.
2 - Select Ambilight and press
(right) to enter
the menu.
3 - Select Ambilight+hue > Reset Configuration,
and press OK.
4 - Press
(left) repeatedly if necessary, to close
the menu.
15.4
Eco Settings
Energy Saving
Eco settings
bundles the settings that help the
environment.
Energy Saving
If you select Energy Saving, the TV switches to Picture
Style - Standard automatically, the most ideal energy
conscious setting for the picture and Ambilight.
To set the TV in Energy Saving…
1 - Press
, select All Settings and press OK.
2 - Select Eco Settings and press
(right) to
enter the menu.
3 - Select Energy Saving, the Picture Style is set to
Standard automatically.
4 - Press
(left) repeatedly if necessary, to close
the menu.
Screen Off
If you only listen to music, you can switch off the TV
screen to save energy.
To only switch off the TV screen…
1 - Press
, select All Settings and press OK.
2 - Select Eco Settings and press
(right) to
enter the menu.
3 - Select Screen Off.
4 - Press
(left) repeatedly if necessary, to close
the menu.
To switch the screen back on, press any key on the
remote control.
Light Sensor
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, together with
Ambilight, to the lighting conditions of the room.
To activate the light sensor…
1 - Press
, select All Settings and press OK.
2 - Select Eco Settings and press
(right) to
enter the menu.
3 - Select Light Sensor. The icon
is shown in
front of Light Sensor when it is active.
4 - Press
(left) repeatedly if necessary, to close
the menu.
Switch off timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1 - Press
, select All Settings and press OK.
2 - Select Eco Settings and press
(right) to
enter the menu.
3 - Select Switch Off Timer. Select inside the slider
bar to adjust the value. The value 0 (Off) deactivates
55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65PUK7120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65PUK7120 in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65PUK7120

Philips 65PUK7120 User Manual - German - 95 pages

Philips 65PUK7120 User Manual - Dutch - 93 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info