811058
15
Zoom out
Zoom in
Previous page
1/86
Next page
Channel Packages
Satellite operators can offer channel packages that
bundle free channels (free-to-air) and offer a sorting that
suits a country. Some satellites offer subscription
packages - a collection of channels you pay for.
If you choose a subscription package, the TV might ask
you to select a Quick or Full installation.
Select Quick to install the channels of the package only
or select Full to install the package and all other available
channels too. We recommend a Quick installation for
subscription packages. If you have additional satellites
that are not part of your subscription package, we
recommend a Full installation. All installed channels are
put in the channels list All.
Unicable Setup
The Unicable System
You can use a Single Cable system or Unicable system* to
connect the antenna dish to the TV. A Single Cable
system uses one cable to connect the satellite dish to all
satellite tuners in its system. A Single Cable system is
typically used in apartment buildings. If you use a
Unicable system, the TV will ask you to assign a user
band number and corresponding frequency during the
installation. You can install up to 4 satellites with
Unicable on this TV.
If you notice some missing channels after a Unicable
installation, another installation might have been done
at the same moment on the Unicable system. Do the
installation again to install the missing channels.
* Note: supports Unicable 1 (EN50494) and Unicable 2
(EN50607/JESS).
User Band Number
In a Unicable system, each connected satellite tuner must
be numbered (e.g. 0, 1, 2 or 3, etc.).
You can find the available user bands and their number
on the Unicable switchbox. User band is sometimes
shortened as UB. There are Unicable switchboxes that
offer 4 or 8 user bands. If you select Unicable in the
settings, the TV will ask you to assign the unique user
band number for each built-in satellite tuners. A satellite
tuner cannot have the same user band number as
another satellite tuner in the Unicable system.
User Band Frequency
Next to the unique user band number, the built-in
satellite receiver needs the frequency of the selected user
band number. These frequencies are mostly shown next
to the user band number on a Unicable switchbox.
Manual Channel Update
You can always start a channel update yourself.
To start a channel update manually:
1 - Select Settings > Channels & Inputs >
Channels > Satellite Installation and press OK.
2 - Select Search for Channels and press OK.
3 - Select Update Channels and press OK. The TV will
start updating. The update may take a few minutes.
4 - Follow the instructions on screen. The update may
take a few minutes.
5 - Select Finish and press OK.
Manual Installation
Manual Installation is intended for expert users.
You can use Manual Installation to quickly add new
channels from a satellite transponder. You need to know
the frequency and polarisation of the transponder. The
TV will install all channels of that transponder. If the
transponder was installed before, all its channels - the
former and the new ones - are moved to the end of the
channel list All.
You cannot use Manual installation if you need to
change the number of satellites. If this is needed, you
have to do a complete installation with Install Satellites.
To install a transponder:
1 - Select Settings > Channels & Inputs >
Channels > Satellite Installation and press OK.
2 - Select Manual Installation and press (right) to enter
the menu.
3 - If you have more than 1 satellite installed,
select LNB for which you want to add channels.
4 - Set the Polarisation you need. If you set the Symbol
Rate Mode to Manual, you can enter the symbol rate
in Symbol Rate manually.
5 - Press the Arrow / navigation keys to adjust the
frequency, and select Done.
6 - Select Search and press OK. The signal strength is
shown on screen.
7 - If you want to store the channels of a new
transponder, select Store and press OK.
8 - Press (left) repeatedly if necessary, to close the
menu.
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 65OLED908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 65OLED908 in the language / languages: English as an attachment in your email.

The manual is 1.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 65OLED908

Philips 65OLED908 User Manual - German - 100 pages

Philips 65OLED908 User Manual - Dutch - 95 pages

Philips 65OLED908 User Manual - French - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info