608900
72
Zoom out
Zoom in
Previous page
1/128
Next page
3 - Now go to the Philips Hue Bridge and press the
link button in the middle of the device. This will link
the Hue Bridge with the TV. Do this within 30
seconds. The TV will confirm if a Hue Bridge is now
linked to the TV.
4 - Select OK and press OK.
With the Philips Hue bridge linked to the TV, go to
page Hue bulbs.
Step 3 - Hue Bulbs
In the next step, you will select the Philips Hue bulbs
that have to follow the Ambilight.
You can select a maximum of 9 Philips Hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the list, mark the bulbs that have to follow the
Ambilight. To mark a bulb, select the bulb name and
press OK. When you mark a bulb, the bulb will blink
once.
2 - When you’re done, select OK and press OK.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb.
Step 4 - Configure Bulb
In the following step, you will configure each Philips
Hue bulb.
To configure each Hue bulb…
1 - Select a bulb to configure and press OK. The
bulb you selected is flashing.
2 - Select Start and press OK.
3 - First indicate where you placed the bulb relative
to the TV. A correct setting of the Angle will send the
correct Ambilight colour to the bulb. Select the slider
bar to adjust the position.
4 - Secondly, indicate the Distance between the
bulb and the TV. The further away from the TV, the
weaker the Ambilight colour. Select the slider bar to
adjust the distance.
5 - Finally, set the Brightness of the bulb. Select the
slider bar to adjust the brightness.
6 - To stop configuring this bulb, select OK and
press OK.
7 - In the Configure Ambilight+hue menu, you can do
the same for each bulb.
8 - When all Ambilight+hue bulbs are configured,
select Finish and press OK.
Ambilight+hue is ready for use.
Switch On or Off
You can switch off the Ambilight+hue effect on the
bulbs. The bulbs will light up white.
To switch off Ambilight+hue…
1 - Press
SETTINGS, select Ambilight+hue and
press OK.
2 - Select Off or On and press OK.
3 - Press
(left) to go back one step or press
BACK to close the menu.
Immersion
You can adjust the level of the Ambilight effect for the
Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Immersion and press
(right).
4 - Press
(up) or
(down) to adjust the value.
5 - Press
(left) to go back one step or press
BACK to close the menu.
View Configuration
In View configuration, you can consult the current
Ambilight+hue configuration. Which network you use,
how many bulbs are connected, etc.
To view the current Ambilight+hue setup…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select View Configuration and press OK.
4 - Press
(left) to go back one step or press
BACK to close the menu.
Reset Configuration
You can reset (uninstall) the complete Ambilight+hue
configuration in one go.
To reset the Ambilight+hue configuration…
1 - Press
SETTINGS, select All Settings and
press OK.
2 - Select Ambilight > Ambilight+hue and press OK.
3 - Select Reset Configuration and press OK. The
configuration is reset.
4 - Press
(left) to go back one step or press
BACK to close the menu.
72
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 55PUS8601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PUS8601 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PUS8601

Philips 55PUS8601 User Manual - German - 120 pages

Philips 55PUS8601 User Manual - Dutch - 113 pages

Philips 55PUS8601 User Manual - French - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info