561036
14
Zoom out
Zoom in
Previous page
1/119
Next page
Two Smart Cards
Some Digital TV operators can provide a second CI+ module
(CAM) and smart card. A second CAM and smart card is
needed when you want to watch one channel while recording
another channel from the same TV operator.
If you can watch the same amount of channels with each card,
both cards have identical viewing rights. If you can watch less
channels with one of the cards, the cards have non-identical
viewing rights.
If your smart cards have identical viewing rights, it does not
matter which card you put in which slot. If one of the cards has
more viewing rights than the other one, insert the card with the
most viewing rights in the slot
COMMON INTERFACE 1
. Insert
the card with less rights in
COMMON INTERFACE 2
.
Insert the smart cards into the CAM modules. See the
instruction you received from the operator.
To insert the CAM in the TV…
1 - Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
2 - While looking at the back of the TV, with the front of the
CAM facing towards you, gently insert the CAM into the slot.
3 - Push the CAM in as far as it will go. Leave it in the slot
permanently.
When you switch on the TV, it may take a few minutes before
the CAM is activated. If a CAM is inserted and subscription fees
are paid (subscription methods can differ), you can watch the
scrambled channels supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If you
remove the CAM, you will no longer be able to watch the
scrambled channels supported by the CAM.
Passwords or PIN codes
For some CAMs, you must enter a PIN code to watch its
channels. When you set the PIN code for the CAM, we
recommend you to use the same code you are using to unlock
the TV.
To set the PIN code for the CAM…
1 - Press
SOURCES
.
2 - Click on the channel type you are using the CAM
for.
Antenna TV
,
Cable TV
or
Satellite TV
.
3 - Press
OPTIONS
and click
Common Interface
.
4 - Click on the TV operator of the CAM. The following screens
come from the TV operator. Look up the PIN code setting.
4.4
Set-Top Box - STB
Use 2 antenna cables to connect the antenna to the Set-top box
(a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to
connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-top box has
no HDMI connection.
Switch Off Timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Switch this timer off to prevent the
TV from switching off automatically after a 4 hour period
without a key press on the remote control of the TV.
In
Help
, press the colour key
Keywords
and look up
Switch
Off Timer
for more information.
4.5
Satellite Receiver
Connect the dish antenna cable to the Satellite receiver.
Next to the antenna connection, add an HDMI cable to connect
the device to the TV.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 55PUS7909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PUS7909 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PUS7909

Philips 55PUS7909 User Manual - German - 129 pages

Philips 55PUS7909 User Manual - Dutch - 125 pages

Philips 55PUS7909 User Manual - French - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info