646882

Philips 55PUS6201 Manual

8
Zoom out
Zoom in
Previous page
1/100
Next page
3
Network
3.1
Network and Internet
Home network
To enjoy the full capabilities of your Philips TV, your
TV must be connected to the Internet.
Connect the TV to a home network with a high-speed
Internet connection. You can connect your TV
wirelessly or wired to your network router.
Connect to network
Wireless connection
What you need
To connect the TV to the Internet wirelessly, you need
a Wi-Fi router with a connection to the Internet.
Use a high-speed (broadband) connection to the
Internet.
Make the connection
Wireless
To make a wireless connection…
1 - Make sure that the router of your wireless network
is switched on.
2 - Press
, select Network and press
(right) to
enter the menu.
3 - Select Connect to network and press OK.
4 - Select Wireless and press OK.
5 - In the list of found networks, select on your
wireless network. If your network is not in the list
because the network name is hidden (you switched
off the SSID broadcast of the router), select Manual
entry to enter the network name yourself.
6 - Depending on the type of router, enter your
encryption key - WEP, WPA or WPA2. If you entered
the encryption key for this network before, you can
select Done to make the connection immediately.
If your router supports WPS or WPS PIN, you
select WPS, WPS PIN or Standard. Select your
choice and press OK.
7 - A message will be shown when the connection is
successful.
WPS
If your router has WPS, you can directly connect to
the router without scanning for networks. If you have
devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
1 - Press
, select Network and press
(right) to
enter the menu.
2 - Select Connect to network and press OK.
3 - Select WPS then press OK.
4 - Go to the router, press the WPS button and return
to the TV within 2 minutes.
5 - Select Connect to make the connection.
6 - A message will be shown when the connection is
successful.
WPS with PIN code
If your router has WPS with a PIN code, you can
directly connect to the router without scanning for
networks. If you have devices in your wireless
network that use the WEP security encryption system,
you cannot use WPS.
1 - Press
, select Network and press  (right) to
enter the menu.
2 - Select Connect to network and press OK.
3 - Select WPS with PIN code and press OK.
4 - Write down the 8-digit PIN code shown on
screen and enter it in the router software on your PC.
Consult the router manual on where to enter the PIN
code in the router software.
5 - Select Connect to make the connection.
6 - A message will be shown when the connection is
successful.
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 55PUS6201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PUS6201 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PUS6201

Philips 55PUS6201 User Manual - German - 101 pages

Philips 55PUS6201 User Manual - Dutch - 94 pages

Philips 55PUS6201 User Manual - French - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info