Manual Philips 55PUS6031 (page 13 of 33) (English)

646898

Zoom out

Zoom in

1/33

English - 12 -

slow forward. Pressing Rapid advance button

consecutively will change slow forwarding speed.

Recording Conguration

Select the Recording Settings item in the Media

Browser>Settings menu to congure the recording

settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. Your PIN is

required to use the Format Disk feature.

Note: Default PIN can be set to 0000 or 1234. If you have

dened the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN

that you have dened.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s le system will be converted

to FAT32. In most cases operation errors will be xed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

All les in the list will be

continuously played in original

order

Start playback with the OK

button and activate

The same le will be played

continuously (repeat)

Start playback with the Play

button and activate

All les in the list will be

played once in random order

Start playback with the Play

button and activate ,

All les in the list will be

continuously played in the

same random order.

Custom Boot Up Logo

You can personalize your TV and see your favorite

image or photo on the screen each time your TV boots

up. To do this, copy your favorite image les into a USB

disk and open them from the Media Browser menu.

When you have chosen the desired image, highlight it

and press OK to view it in full screen. Press OK again

to choose the image as custom logo. A conrmation

message will be displayed. Select Yes and press OK

again. If the image is suitable(*) you will see it on the

screen during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will

return to using the default logo, if any.

(*) Images must have an aspect ratio between 4:3 to 16:9

and they must be in .jpeg, .jpg or .jpe le formats. The image

cannot be set as boot logo, which’s resolution doesn’t appear

on the info banner.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>More menu should

be set as Enabled at rst. Press the Source button

and select the HDMI input of the connected CEC

device from the Sources List menu. When new CEC

source device is connected, it will be listed in source

menu with its own name instead of the connected

HDMI ports name(such as DVD Player, Recorder

1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

set as Off by pressing Left or Right button. This

feature can also be enabled or disabled under the

Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio

from connected audio device only (same as other

optical or co-axial digital audio outputs). If you want

to change connected device’s volume level, you

should select that device from the source list. In that

case volume control keys are directed to connected

audio device.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the Settings>More menu as

Amplier. The TV speakers will be muted and the

sound of the watched source will be provided from

the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PUS6031 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PUS6031

Philips 55PUS6031 User Manual - German - 37 pages

Philips 55PUS6031 User Manual - Dutch - 35 pages

Philips 55PUS6031 User Manual - French - 35 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 55PUS6031 Manual

Product: