561041

Philips 55PFT6309 Manual

10
Zoom out
Zoom in
Previous page
1/88
Next page
Register your product and get support at Smart LED TV
www.philips.com/welcome
42PFH6309
42PFT6309
42PFT6309
47PFH6309
47PFT6309
47PFT6309
55PFH6309
55PFT6309
User Manual
Contents
1 My new TV
4
1.1 Smart TV 4
1.2 App gallery 4
1.3 Rental videos 4
1.4 Social networks 4
1.5 Ambilight+hue 4
1.6 Skype 5
1.7 Smartphones and tablets 5
1.8 Pause TV and recordings 5
1.9 Gaming 5
1.10 EasyLink 6
2 Setting up
7
2.1 Read safety 7
2.2 TV stand and wall mounting 7
2.3 Tips on placement 7
2.4 Power cable 7
2.5 Antenna cable 7
3 Network
9
3.1 Wireless network 9
3.2 Wired network 10
3.3 Network settings 10
4 Connections
12
4.1 Tips on connections 12
4.2 EasyLink HDMI CEC 13
4.3 Common interface - CAM 14
4.4 Set-top box - STB 15
4.5 Home Theatre System - HTS 15
4.6 Blu-ray Disc player 16
4.7 DVD player 17
4.8 Game console 17
4.9 USB Hard Drive 18
4.10 USB keyboard or mouse 18
4.11 USB flash drive 19
4.12 Photo camera 19
4.13 Camcorder 20
4.14 Computer 20
4.15 Headphones 21
5 Switch on
22
5.1 On or Standby 22
5.2 Keys on TV 22
5.3 Word mark brightness 22
6 Remote control
23
6.1 Key overview 23
6.2 IR sensor for non-RF remote control 24
6.3 Batteries 24
6.4 Cleaning 24
7 TV channels
25
7.1 Watching TV channels 25
7.2 Channel installation 30
8 Home menu
34
9 TV guide
35
9.1 What you need 35
9.2 Using the TV guide 35
9.3 Recordings 35
10 Sources
36
10.1 Sources list 36
10.2 From standby 36
10.3 EasyLink 36
11 Timers and clock
37
11.1 Sleeptimer 37
11.2 Clock 37
11.3 Switch off timer 37
12 3D
38
12.1 What you need 38
12.2 The 3D glasses 38
12.3 Care of the 3D glasses 38
12.4 Watch 3D 38
12.5 Optimal 3D viewing 38
12.6 Health warning 39
13 Games
40
13.1 Play a game 40
13.2 Two-player games 40
14 Your photos, videos and music
41
14.1 From a USB connection or network computer 41
14.2 Wi-Fi Miracast 42
15 Pause TV
44
16 Recording
45
16.1 What you need 45
16.2 Record a programme 45
16.3 Watch a recording 45
17 Skype
47
17.1 About Skype 47
17.2 What you need 47
17.3 Start with Skype 47
17.4 Skype menu 48
17.5 My profile 48
17.6 People 49
17.7 Calling on Skype 50
17.8 Skype credit 51
17.9 Skype settings 51
17.10 Sign out 53
17.11 Quit Skype 53
17.12 Terms of use & Privacy Policy 53
18 Smart TV
54
18.1 About Smart TV 54
18.2 What you need 54
18.3 Setup Smart TV 54
18.4 Smart TV Apps 54
18.5 Multi view 56
18.6 Reset Smart TV 56
19 Multi room
57
19.1 About Multi room 57
19.2 What you need 57
2
19.3 Using Multi room 57
20 Settings
58
20.1 Setup menu 58
20.2 Picture 58
20.3 Sound 61
20.4 Ambilight 63
20.5 Universal access 66
21 Specifications
68
21.1 Environmental 68
21.2 Display 68
21.3 Power 69
21.4 Dimensions and weights (6309 series) 69
21.5 Connectivity 69
21.6 Multimedia 69
22 Software
71
22.1 Software update 71
22.2 Software version 71
22.3 Open source software 71
22.4 Open source license 71
23 Troubleshooting and support
77
23.1 Troubleshooting 77
23.2 Register 78
23.3 Help 78
23.4 Online help 78
23.5 Consumer Care / Repair 79
24 Safety and care
80
24.1 Safety 80
24.2 Screen care 81
25 Terms of use, copyrights and licenses
82
25.1 Terms of use 82
25.2 Copyrights and licenses 82
Index
85
3
1
My new TV
1.1
Smart TV
Connect this
Philips Smart LED TV
to the Internet and discover
a new world of television. You can make a wired connection to
your router or you can link up wirelessly with Wi-Fi.
With the TV connected to your home network, a smartphone
can show a photo on TV, you can play videos stored on your
computer or control the TV with your tablet.
With your TV connected to the Internet, you can watch a rental
video from an online video store, read the online TV guide or
record your favourite TV show on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
In
Help
, press
Keywords
and look up
Smart TV
for more
information.
1.2
App gallery
Open the
App gallery
in Smart TV to browse the Apps, the
collection of tailored websites for TV.
Find the App for YouTube videos, a national newspaper, an
online photo album, Facebook, Twitter, etc.
There are Apps to rent a video from an online video store and
Apps for watching programmes you missed.
If the App gallery does not hold what you are looking for, try
the World Wide Web and surf the Internet on TV.
In
Help
, press
Keywords
and look up
App gallery
for more
information.
1.3
Rental videos
To watch a
rental video
, you don't need to leave your home.
Simply rent the latest movie from your regional online
video store.
Start Smart TV and add the video store App to the Smart TV
start page.
Open the video store App, create your personal account, select
the movie and press play.
No fuss with downloading, you can watch the
movie immediately*.
In
Help
, press
Keywords
and look up
Rental videos
for
more information.
* Depending on the video streaming service of the selected
video store.
1.4
Social networks
No need to get up to check your friend's messages on your
computer.
Open Smart TV, select your
social network
page and send a
message back from your couch.
Smart TV supports the popular social networks Facebook and
Twitter.
In
Help
, press
Keywords
and look up
App gallery
for more
information.
1.5
Ambilight+hue
With
Ambilight+hue
, you can set up your
Philips hue
lamps to
follow the Ambilight colours of the TV.
The Philips hue lamps will expand the Ambilight effect across the
room. If you don’t have any Philips hue lamps yet, buy the
Philips hue Starter Kit
(includes a hue bridge and 3 hue bulbs)
and install the bulbs and bridge. You can buy extra Philips hue
bulbs separately.
4
1.6
Skype
With
Skype™
you can make video calls on your TV for free.
You can call and see your friends from anywhere in the world.
To make a video call, you need a camera with a built-in
microphone and a good connection to the Internet. Some
Philips TVs have a camera and microphone built in.
In
Help
, press
Keywords
and look up
Skype
for more
information.
1.7
Smartphones and tablets
To use your smartphone or tablet as a TV remote control or as
your media controller, download the
Philips MyRemote
app
from your smartphone or tablet app store.
Operate your TV from your smartphone or tablet, switch
channels or change the volume. With the MyRemote app, you
can use your phone or tablet to send photos, music or videos
from your computer to your TV. And with MyRemote app on a
tablet, you can call up the TV guide, read about the programmes
and switch the TV to a channel with a simple tap of your finger.
The MyRemote app is available for iOS and Android.
In
Help
, press
Keywords
and look up
MyRemote app
for
more information.
1.8
Pause TV and recordings
If you connect a
USB Hard Drive
, you can pause and record a
broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or simply take
a break during a sports match, while the TV stores the broadcast
on the USB Hard Drive. You can start watching again later.
With a USB Hard Drive connected, you can also record digital
broadcasts. You can record while you are watching a
programme or schedule a recording of an upcoming
programme.
In
Help
, press
Keywords
and look up
Pause TV
or
Recording
for more information.
1.9
Gaming
If you select your game console in the Home menu, the TV
switches to the settings ideal for gaming automatically.
If you play a multi-player game with split screens, you can set the
TV to show each screen as a full screen simultaneously.
Each player can focus on his own game to play.
The TV uses 3D technology to show both screens. To play a
two-player game with two different full screen pictures, you
need a pair of 3D glasses for each player.
5
In
Help
, press
Keywords
and look up
Game console or
Two player games
for more information.
1.10
EasyLink
With
EasyLink
you can operate a connected device, like a Bluray
Disc player, with the remote control of the TV.
EasyLink uses HDMI CEC to communicate with the connected
devices.
In
Help
, press
Keywords
and look up
EasyLink
for more
information.
6
2
Setting up
2.1
Read safety
Read the safety instructions first before you use the TV.
In Help, go to
Safety and care
>
Safety
.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV stand in the
Quick Start Guide that came with the TV. In case you lost this
guide, you can download it from www.philips.com.
Use the product type number of the TV to look for the Quick
Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the wall mount .
. .
To fix the bracket securely, use screws with a length indicated in
the drawing.
• For 6309 series 47-inch/55-inch TV
VESA MIS-F 400x400, M6
• For 6309 series 42-inch TV
VESA MIS-F 200x200, M6
• For 6109 series 55-inch TV
VESA MIS-F 400x400, M6
• For 6109 series 42-inch/47-inch TV
VESA MIS-F 400x200, M6
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
meet safety standards according to the TV's weight. Also read
the safety precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
2.3
Tips on placement
• Position the TV where light does not shine directly on the
screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal screen
size. When seated, your eyes should be level with the centre of
the screen.
2.4
Power cable
• Insert the power cable into the
POWER
connector on the
back of the TV.
• Make sure the power cable is securely inserted in the
connector.
• Make sure that the power plug, in the wall socket, is accessible
at all times.
• When you unplug the power cable, always pull the plug, never
pull the cable.
Although this TV has a very low standby power consumption,
unplug the power cable to save energy if you do not use the TV
for a long period of time.
In
Help
, press
Keywords
and look up Switching on for more
information on switching the TV on or off.
7
2.5
Antenna cable
Insert the antenna plug firmly into the
ANTENNA
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
8
3
Network
3.1
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need a
wireless router. Use a high-speed (broadband) connection to
the Internet..
Network devices
The TV can connect to other devices in your wireless network,
like your computer or smartphone. You can use a computer
with Microsoft Windows or Apple OS X.
File sharing
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
Make the connection
Follow steps 1 to 5.
Step 1
- Make sure that the router of your wireless network is
switched on.
Step 2
- Press
and select
Setup
and press
OK
.
Step 3
- Select
Connect to network
and press
OK
.
Step 4
- Select
Connect
and press
OK
.
Step 5
- Select
Wireless
and press
OK
.
Step 6
- Select
Scan
to scan for your wireless network. If you
have a router with WPS (Wi-Fi Protected Setup), you can select
WPS
. Select your choice and press
OK
.
•
Scan
Select
Scan
to scan for your wireless network (your wireless
router). The TV might find several wireless networks in your
proximity.
•
WPS
If your router has WPS, you can directly connect to the router
without scanning. Go to the router, press the WPS button and
return to the TV within 2 minutes. Then press
Connect
to make
the connection.
If you have devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
If you must use the
WPS PIN code
to connect, select
Scan
instead of WPS.
Step 7
- In the list of networks found, select your wireless
network and press
OK
.
If your network is not in the list because the network name is
hidden (you switched off the SSID broadcast of the router),
select
Manual entry
to enter the network name yourself.
Step 8
- Depending on the type of router, you can now enter
your encryption key (WEP, WPA or WPA2). If you entered the
encryption key for this network before, you can select
Next
to
make the connection immediately.
If your router supports WPS or WPS PIN, you select
WPS
,
WPS PIN
or
Standard
. Select your choice and press
OK
.
•
Standard
Select
Standard
to enter the encryption key (password,
passphrase or security key) manually.You can use the keyboard
on the RC to enter the encryption key. Once you have entered
the key, press
Connect
.
•
WPS PIN
To make a secured WPS connection with a PIN code, select
WPS PIN
and press
OK
. Write down the 8-digit PIN code
shown and enter it in the router software on your PC. Return to
the TV and press
Connect
. Consult the router manual on where
to enter the PIN code in the router software.
Step 9
- A message will be shown when the connection is
successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to
On
.
Alternatively, if you are an advanced user and want to install
your network with Static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press
and select
Setup
and press
OK
. Select
Network settings
>
Network settings
>
Network
configuration
>
Static IP
. With Static IP selected in the menu,
you can set the IP address and other necessary settings in
Static
IP configuration
in the same menu.
9
Network problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n
devices in your proximity might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV's wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the router
connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• Use a high-speed (broadband) Internet connection for your
router.
3.2
Wired network
What you need
You need a network
router
to connect the TV to the Internet.
Use a router with a high-speed (broadband) connection to the
Internet.
File sharing
On this TV, you can open photos, music and videos stored on
your computer. Use a recent version of media server software
like Philips MediaManager*, Windows Media Player 11,
Twonky™ or similar.
Install the media server software on your computer and set it up
to share your media files with the TV. Read the manual of the
media server software for more information. This software must
be running on your computer to view or play your files on TV.
* You can download the Philips MediaManager software from
the Philips support site www.philips.com/support
In
Help
, press
Keywords
and look up
Media server
software, supported
for an overview of supported media server
software.
Connect the router
To connect and setup the router follow steps
1
to
5
.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press
and select
Setup
and press
OK
.
4 - Select
Connect to network
and press
OK
.
5 - Select
Wired
and press
OK
.
The TV constantly searches for the network connection. A
message will be shown when the connection is successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to
On
.
Alternatively, if you are an advanced user and want to install
your network with static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press
and select
Setup
and
press
OK
.
Select
Network settings
>
Network settings
>
Network
configuration
>
Static IP
. With Static IP selected in the menu,
you can set the IP address and other necessary settings in
Static
IP configuration
in the same menu.
**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet
cable.
3.3
Network settings
To open the Network settings . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Network settings
and press
OK
.
•
View network settings
All current network settings are shown here. The IP and MAC
address, signal strength, speed, encryption method, etc.
•
Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
•
Wi-Fi media playback
To receive multimedia files from smartphones or tablets, set the
DMR to On.
•
Static IP configuration
If Static IP is selected in Network Settings menu, you can set all
necessary static IP settings here.
•
Wi-Fi Miracast
10
For more information on Wi-Fi Miracast,
press
Keywords
and look up
Wi-Fi Miracast™
.
•
Reset Wi-Fi Miracast group
Clear the list of connected and blocked devices that are used
with Miracast.
•
Wi-Fi smart screen
For more information on Wi-Fi smart screen,
press
Keywords
and look up
Wi-Fi smart screen
.
•
TV network name
If you have more than one TV in your network, you can rename
the TVs here.
•
Netflix Settings
Adjust Netflix settings.
•
Clear Internet memory
With Clear Internet memory, you can clear all Internet files
stored on your TV. You clear your Philips Smart TV registration
and parental rating settings, your video store app logins, all Smart
TV app favourites, Internet bookmarks and history. Interactive
MHEG applications can also save so-called 'cookies', on your TV.
These files will also be cleared.
11
4
Connections
4.1
Tips on connections
Connectivity guide
Always connect a device to the TV with the highest quality
connection available. Also, use good quality cables to ensure a
good transfer of picture and sound.
If you need help to connect several devices to the TV, you can
visit the Philips TV connectivity guide. The guide offers
information on how to connect and which cables to use.
Go to
www.connectivityguide.philips.com
Antenna
If you have a Set-top box (a digital receiver) or Recorder,
connect the antenna cables to run the antenna signal through
the Set-top box and/or Recorder first before it enters the TV. In
this way, the antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) or Ultra HD (UHD) TV
signals. For best signal quality transfer, use a High speed HDMI
cable and do not use an HDMI cable longer than 5 m.
EasyLink HDMI CEC
If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. EasyLink HDMI
CEC must be switched On on the TV and the connected
device.
For more information on using EasyLink, press
Keywords
and look up
EasyLink CEC
.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI
connection. Use one of the HDMI connections and add an
Audio L/R cable (mini-jack 3.5mm) to AUDIO IN for sound, on
the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM (Digital Rights Management).
HDMI ARC
All of the HDMI connections on the TV have HDMI ARC
(Audio Return Channel).
If the device, typically a Home Theatre Sysytem (HTS), also has
the HDMI ARC connection, connect it to any of the HDMI
connections on this TV. With the HDMI ARC connection, you
do not need to connect the extra audio cable that sends the
sound of the TV picture to the HTS. The HDMI ARC
connection combines both signals.
You can use any HDMI connection on this TV to connect the
HTS but ARC is only available for 1 device/connection at a time.
In case you prefer to switch off ARC on the HDMI connections,
press
and select
Setup
and press
OK
.
Select
TV settings
>
Sound
>
Advanced
>
HDMI ARC
.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality connection. The
YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left and
Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
12
• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality connection. Next to
the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component/composite connectors.
Scart
SCART is a good quality connection. The SCART connection
can be used for CVBS and RGB video signals but cannot be used
for High Definition (HD) TV signals. The SCART connection
combines video and audio signals.
Use the SCART adapter cable to connect your device.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection. This
optical connection can carry 5.1 audio channels. If your device,
typically a Home Theatre System (HTS), has no HDMI ARC
connection, you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press
Keywords
and look up
Audio
Out settings
.
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press
Keywords
and look up
Audio
to video sync
.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure that all
HDMI CEC settings are properly set up on the connected
EasyLink devices. EasyLink might not work with devices from
other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
13
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Example HDMI CEC branding names are property of their
respective owners.
Operate devices
To operate a device connected to HDMI and set up with
EasyLink, select the device - or its activity - in the list of TV
connections. Press
SOURCES
, select a device connected to
an HDMI connection and press
OK
.
Once the device is selected, the TV remote control can control
the device. However
and
OPTIONS
keys and some
other TV keys are not forwarded to the device.
If the key you need is not on the TV remote control, you can
select the key in the Options menu.
Press
OPTIONS
and select
Controls
in the menu bar. On
the screen, select the device key you need and press
OK
.
Some very specific device keys might not be available in the
Controls menu.
Note: Only devices that support
EasyLink remote control
function will respond to the TV remote control.
EasyLink settings
The TV comes with all EasyLink settings switched on. You can
switch off any EasyLink setting independently.
EasyLink
To switch off EasyLink completely . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
EasyLink, and press
OK.
3 - Select
Off
and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
EasyLink Remote Control
If you want devices to communicate but you don't want to
operate them with the TV remote control, you can switch off
EasyLink remote control separately.
In the EasyLink settings menu, select
EasyLink remote control
and select
Off
.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might have their
own picture quality processing. To avoid bad picture quality
caused by interference with the TV processing, the picture
processing of these devices should be disabled. The TV comes
with Pixel Plus Link switched on and disables the picture quality
processing of recent Philips devices connected to the TV.
To switch off Pixel Plus Link, in the EasyLink settings menu,
select
Pixel Plus Link
and select
Off
.
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a Philips disc player that
supports subtitles, the TV can move the subtitles upwards.
Subtitles will be visible whatever Picture format you select. The
TV comes with Auto subtitle shift switched on.
To switch off Auto subtitle shift, in the EasyLink settings menu,
select
Auto subtitle shift
and select
Off
.
Auto switch off devices
You can set the TV to switch off the connecting HDMI-CEC
compliant devices if they are not the active source. The TV
switches the connected device to standby after 10 minutes of
inactivity.
4.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes, like movies
and sports, offered by digital TV broadcasters in your region.
These programmes are scrambled by the TV broadcaster and
descrambled with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module (Conditional
Access Module - CAM) when you subscribe to their premium
programmes. These programmes have a high level of copy
protection.
Contact a digital TV broadcaster for more information on terms
& conditions.
For more information on connecting a CAM module, press
Keywords
and look up
Common Interface CAM
.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
insertion can damage the CAM and TV.
14
Use the Common Interface slot on the TV to insert the CAM
card.
With the front of the card facing towards you, gently insert the
CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is activated.
Removing the CAM will deactivate the broadcast service on TV.
If a CAM is inserted and subscription fees are paid, (connection
methods can differ), you can watch the TV broadcast. The
inserted CAM is exclusively for your TV.
CAM settings
To set passwords or PIN codes for the CAM TV broadcast,
press
and select
Setup
and press
OK
.
Select
Channel settings
>
Common Interface
.
Select the CAM TV broadcaster and press
OK
.
4.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the Set-top box
(a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable to
connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-top box has
no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the remote
control of the Set-top box. Do this to prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the Switch off timer, press
and select
Setup
and
press
OK
.
Select
TV settings
>
General settings
>
Switch off timer
and
set the slider bar to
Off
.
4.5
Home Theatre System - HTS
Connect HTS
Use an HDMI cable to connect a Home Theatre System (HTS)
to the TV. You can connect a Philips Soundbar or an HTS with a
built-in disc player.
Alternatively, you can use a SCART cable if the device has no
HDMI connection.
HDMI ARC
If your Home Theatre System has an HDMI ARC connection,
you can use any HDMI connection on the TV to connect. With
HDMI ARC, you do not need to connect the extra audio cable.
The HDMI ARC connection combines both signals.
All HDMI connections on the TV can offer the Audio Return
Channel (ARC) signal. But once you have connected the Home
Theatre System, the TV can only send the ARC signal to this
HDMI connection.
If the Home Theatre System has no HDMI ARC connection,
add an optical audio cable (Toslink) to send the sound of the TV
picture to the Home Theatre System.
Audio to video synchronisation (sync)
15
If the sound does not match the video on screen, you can set a
delay on most Home Theatre Systems with a disc player to
match the sound with the video.
For more information, press
Keywords
and look up
Audio
to video sync
.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the TV, the
picture on TV and the sound from the HTS should be
synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video
sync is done automatically synchronised and always correct.
Audio sync delay
For some Home Theatre Systems you might need to adjust the
audio sync delay to synchronise the audio to the video. On the
HTS, increase the delay value until there is a match between
picture and sound. A delay value of 180ms may be required.
Read the user manual of the HTS. With a delay value set up on
the HTS, you need to switch off Audio out delay on the TV.
To switch off the Audio Out delay . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Sound
>
Advanced
>
Audio out delay
.
3 - Select
Off
and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
Audio Out offset
If you cannot set a delay on the Home Theatre System, you can
set the TV to sync the sound. You can set an offset that
compensates for the time necessary for the Home Theatre
System to process the sound of the TV picture. You can set the
value in steps of 5ms. Maximum setting is -60ms. The Audio Out
delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Sound
>
Advanced
>
Audio out offset
.
3 - Use the slider bar to set the sound offset and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like Dolby
Digital, DTS® or similar, set the Audio out format to
Multichannel. With Multichannel, the TV can send the
compressed multichannel sound signal from a TV channel or
connected player to the Home Theatre System. If you have a
Home Theatre System without multichannel sound processing,
select Stereo.
To set the Audio out format . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Sound
>
Advanced
>
Audio out
format
.
3 - Select
Multichannel
or
Stereo
.
4 - Press
, repeatedly if necessary, to close the menu.
Audio Out levelling
Use the Audio Out levelling setting to level the volume
(loudness) of the TV and the Home Theatre System when you
switch over from one to another. Volume differences can be
caused by differences in sound processing.
To level the difference in volume . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Sound
>
Advanced
>
Audio out
levelling
.
3 - If the volume difference is large, select
More
. If the volume
difference is small, select
Less
.
4 - Press
, repeatedly if necessary, to close the menu.
Audio Out levelling affects both the Audio Out - Optical and
HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive or
connected computer, the sound from your Home Theatre
System might be distorted. This noise is heard when the audio
or video file has DTS sound but the Home Theatre System has
no DTS sound processing. You can fix this by setting the
Audio
out format
of the TV to
Stereo
.
Press
and select
Setup
>
TV settings
>
Sound
>
Advanced
>
Audio out format
.
No sound
If you cannot hear the sound from the TV on your Home
Theatre System, check the following . . .
• Check if you connected the HDMI cable to an
HDMI ARC
connection on the Home Theatre System. All HDMI
connections on the TV are HDMI ARC connections.
• Check if the
HDMI ARC
setting on the TV is switched
On
.
Press
and select
Setup
>
TV settings
>
Sound
>
Advanced
>
HDMI ARC
.
16
4.6
Blu-ray Disc player
Use a
High speed HDMI
cable to connect the Blu-ray Disc
player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC, you can
operate the player with the TV remote control.
For more information on EasyLink, press
Keywords
and look
up
EasyLink HDMI CEC
.
4.7
DVD player
Use an HDMI cable to connect the DVD player to the TV.
Alternatively, you can use a SCART cable, if the device has no
HDMI connection.
If the DVD player is connected with HDMI and has EasyLink
CEC, you can operate the player with the TV remote control.
For more information on EasyLink, press
Keywords
and
look up
EasyLink HDMI CEC
.
4.8
Game console
HDMI
For best quality, connect the game console with an High speed
HDMI cable to the TV
Y Pb Pr - Audio L R
Connect the game console with a component video cable (Y Pb
Pr) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
CVBS - Audio L R / Scart
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
If your game console only has Video (CVBS) and Audio L/R
output, use a Video Audio L/R to SCART adapter to connect to
the SCART connection.
Note: the CVBS to SCART Adapter is not provided in the TV
set.
17
CVBS - Audio L R
Connect the game console to the TV with a composite cable
(CVBS) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.9
USB Hard Drive
What you need
If you connect a USB Hard Drive, you can pause or record a TV
broadcast. The TV broadcast must be a digital broadcast (DVB
broadcast or similar).
To pause
To pause a broadcast, you need a USB 2.0 compatible Hard
Drive with a minimum of 32GB disk space.
To record
To pause and record a broadcast, you need a minimum of
250GB disk space.
TV guide
Before you decide to buy a USB Hard Drive to record, you can
check if it is possible to record digital TV channels in your
country.
Press
TV GUIDE
on the remote control. If there is a Record
button on the TV guide page, you can record.
For more information on how to install a USB Hard Drive, press
Keywords
and look up
USB Hard Drive, installation
.
Installation
Before you can pause or record a broadcast, you must connect
and format a USB Hard Drive. If you want to record a broadcast
with TV guide data from the Internet, you need to have the
Internet connection installed on your TV before you install the
USB Hard Drive. Formatting removes all files from the USB
Hard Drive.
1 - Connect the USB Hard Drive to one of the
USB
connections on the TV. Do not connect another USB device to
the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel, press
(Pause). Trying to pause will start the formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it connected
permanently.
Warning
The USB Hard Drive is formatted exclusively for this TV, you
cannot use the stored recordings on another TV or PC. Do not
copy or change recording files on the USB Hard Drive with any
PC application. This will corrupt your recordings. When you
format another USB Hard Drive, the content on the former will
be lost. A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
For more information, press
Keywords
and look up
Pause
TV
or
Recording
.
4.10
USB keyboard or mouse
USB keyboard
Connect a USB keyboard (USB-HID type) to enter text on your
TV.
You can connect a keyboard and a mouse to the TV.
Use one of the
USB
connections to connect.
18
Install the keyboard
To install the USB keyboard, switch on the TV and connect the
USB keyboard to one of the
USB
connections on the TV. When
the TV detects the keyboard for the first time, you can select
your keyboard lay-out and test your selection. If you select a
Cyrillic or Greek keyboard lay-out first, you can select a
secondary Latin keyboard lay-out.
To change the keyboard lay-out setting when a lay-out was
selected…
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
USB keyboard
settings
and press
OK
.
Keys for channel renaming
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard lay-outs, if a secondary lay-out is
set, press the
Ctrl + Shift
keys simultaneously.
Keys for Smart TV Apps and Internet pages
• Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width.
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to navigate
pages on the Internet.
On an Internet page, you can select and click on links more
easily.
Connect the mouse
Switch the TV on and connect the USB mouse to one of the
USB
connections on the TV. You can also connect the USB
mouse to a connected USB keyboard.
Mouse clicks
• Left click =
OK
• Right click =
Back
You can use the scroll wheel to scroll pages up and down.
For more information on how to connect a keyboard,
press
Keywords
and look up
USB keyboard
.
Mouse speed
You can adjust the speed of the mouse moving on screen.
To adjust the speed . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
and press
OK
.
3 - Select
General settings
>
Pointer / Mouse settings
and
press
OK
.
4 - Press the arrows
(up) or
(down) to increase or lower
the speed.
5 - Press
OK
to store and close the setting.
6 - Press
, repeatedly if necessary, to close the menu.
4.11
USB flash drive
You can view photos or play your music and videos from a
connected USB flash drive.
Insert a USB flash drive in one of the
USB
connections on the
TV while the TV is switched on.
The TV detects the flash drive and opens a list showing its
content.
If the contents list does not appear automatically, press
SOURCE
, select
USB
and press
OK
.
To stop watching the USB flash drive content, press
EXIT
or
select another activity.
To disconnect the USB flash drive, you can pull out the flash
drive anytime.
For more information on watching or playing content from a
USB flash drive, press
Keywords
and look up
Your photos,
videos and music
.
4.12
Photo camera
To view photos stored on your digital photo camera, you can
connect the camera directly to the TV.
Use one of the
USB
connections on the TV to connect. Switch
on the camera after you made the connection.
19
If the contents list does not appear automatically, press
SOURCE
, select
USB
and press
OK
.
Your camera might need to be set to transfer its content with
PTP (Picture Transfer Protocol). Read the user manual of the
digital photo camera.
For more information on viewing photos, press
Keywords
and look up
Your photos, videos and music
.
Ultra HD on USB
You can view photos in Ultra HD resolution from a connected
USB device or flash drive. The TV will downscale the resolution
to Ultra HD if the resolution of the photo is higher. You cannot
play a native Ultra HD video on any of the USB connections.
4.13
Camcorder
HDMI
For best quality, use an HDMI cable to connect the camcorder
to the TV.
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to connect
your camcorder. If your camcorder only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART adapter to
connect to the SCART connection.
Note: the CVBS to Scart Adaptor is not provided in the TV set.
CVBS - Audio L R
Use a Video Audio L/R cable to connect the camcorder to the
TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.14
Computer
Connect
You can connect your computer to the TV and use the TV as a
PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to connect
20
the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to
AUDIO IN L/R on the back of the TV.
Settings
Ideal monitor setting
If your computer is added as a Computer type of device in the
Source menu (the list of connections), the TV is set to the ideal
Computer setting automatically.
If you use your computer to watch movies or use it to play
games, you might want to set the TV back to the ideal TV
watching or gaming setting.
To set the TV to the ideal setting manually . . .
1 - Press
and select
Setup
and press
OK.
2 - Select
TV settings
>
Picture
>
Advanced
>
Activity
style
and press
OK
.
3 - Select
Game
(for gaming) or select
Computer
(for watching
a movie) and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
Remember to set the Game or computer setting back
to
Computer
when you stop playing the game.
4.15
Headphones
You can connect a set of headphones to the
connection on
the TV. The connection is a mini-jack 3.5mm. You can adjust the
volume of the headphones separately.
To adjust the volume . . .
1 - Press
and select
Setup
and press
OK.
2 - Select
TV settings
>
Sound
>
Headphones volume
and
press
OK
.
3 - Press
(up) or
(down) to adjust the volume.
4 - Press
, repeatedly if necessay, to close the menu.
21
5
Switch on
5.1
On or Standby
Make sure you plugged in the mains power on the back of the
TV before you switch on the TV.
If the red indicator light is off, press the Joystick on the right side
or on the back of the TV to put the TV in standby - the red
indicator will light up.
With the TV in standby, press
onon the remote control to
switch the TV on.
Switch to standby
To switch the TV to standby, press
on the remote control.
Switch Off
To switch the TV Off, press the Joystick on the right or on the
back. The red indicator light is off. The TV is still connected to
the mains power but consumes a minimum of energy.
To switch off the TV completely, disconnect the power plug.
When disconnecting the power plug, always pull the power plug,
never the cord. Ensure that you have full access to the power
plug, power cord and outlet socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick to display
the menu.
• Use the arrow/nevigation keys to nevigate up, down, left or
right.
• Press the Joystick to confirm a selection or setting.
5.3
Word mark brightness
You can switch off or adjust the word mark lighting.
To adjust or switch off…
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Word mark
brightness
and press
OK
.
3 - Select
Maximum
,
Medium
,
Minimum
or select
Off
to switch
off the lighting of the word mark.
4 - Press
, repeatedly if necessary, to close the menu.
• Only available for certain TV models
22
6
Remote control
6.1
Key overview
Top
1
-
Standby
/
On
To switch the TV On or back to Standby.
2
-
Playback and record
keys
• Play
, to playback.
• Pause
, to pause playback
• Stop
, to stop playback
• Rewind
, to rewind
• Fast forward
, to go fast forward
• Record
, to record now
3
-
Ambilight
To select an Ambilight setting.
4
-
TV GUIDE
To open or close the TV guide.
5
-
Settings
To open the Settings menu.
6
-
Picture format
To open or close the Picture format menu.
7
-
SOURCES
To open or close the Sources menu - the list of connected
devices.
8
-
SEARCH
To open the Popular searches page.
Middle
1
-
SMART TV
To open the Smart TV start page.
2
-
Colour keys
Follow on screen instructions. Blue key
, opens Help.
3
-
INFO
To open or close programme info.
4
-
BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
5
-
HOME
To open or close the home menu.
6
-
EXIT
To switch back to watching TV.
7
-
OPTIONS
To open or close the Options menu.
8
-
OK
key
To confirm a selection or setting.
9
-
Arrow / navigation
keys
To navigate up, down, left or right.
10
-
MULTIVIEW
To open an extra small screen.
Bottom
1
-
Volume
To adjust the volume level.
2
-
Number keys
and
text keypad
To select a TV channel directly or to enter text.
3
-
SUBTITLE
To switch subtitles on, off or Automatic.
23
4
-
LIST
To open or close the channel list.
5
-
Channel
To switch to the next or previous channel in the channel list.
To open the next or previous page in Text or start the next or
previous chapter on a disc.
6
-
Mute
To mute the sound or to restore it.
7
-
TEXT
To open or close Text / Teletext.
6.2
IR sensor for non-RF remote
control
The TV can receive commands from a remote control that uses
IR (infrared) to send commands. If you use such a remote
control, always make sure you point the remote control at the
infrared sensor on the front of the TV.
6.3
Batteries
1 - Slide the battery door in the direction shown by the arrow.
2 - Replace the old batteries with 2 type
AAA-R03-1.5V
batteries. Make sure the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it back until it clicks.
Remove the batteries if you are not using the remote control for
a long time.
Safely dispose of your old batteries according to the end of use
directions.
For more information, press
Keywords
and look up
End of
use
.
6.4
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the remote control.
24
7
TV channels
7.1
Watching TV channels
Switch channels
To watch TV channels, press
. The TV tunes to the TV
channel you last watched.
Alternatively, press
to open the Home menu and select
Watch TV
and press
OK
.
To switch channels, press
+
or
-
. If you know the channel
number, type in the number with the number keys. Press
OK
after you entered the number to switch channels.
To switch back to the previously tuned channel, press
.
To switch to a channel from a channel list
While watching a TV channel, press
LIST
to open the
channel lists.
The channel list can have several pages with channels. To view
the next or previous page, press
+
or
-
.
To close the channel lists without switching channels, press
LIST
again.
Radio channels
If digital broadcasting is available, digital radio stations are
installed during installation. Switch to a radio channel just like you
switch to a TV channel.
Channel list
Favourite channels
You can create a favourite channel list that only holds the
channels you want to watch. With the Favourite channel list
selected, you will only see your favourite channels when you
switch through channels.
Create your favourite channel list
1 - While watching a TV channel, press
LIST
to open the
channel list.
2 - Select All to view all channels.
3 - Select the channel, and press
to mark as favourite.
4 - The selected channel is marked with a
.
5 - To finish, press
. The channels are added to the Favourites
list.
To remove a channel from the favourites list, select the channel
with
, then press
again to unmark as favourite.
Reorder
You can reorder — reposition — channels in the Favourite
channel list.
1 - In the channel list
Favourites
, highlight the channel you want
to reposition.
2 - Press
.
3 - Select the channel to reorder and press
OK
.
4 - Press the
Navigation buttons
to move the highlighted
channel to another location and press
OK
.
5 - Once complete, press
EXIT
to exit from the Favourite
channel list.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and radio
channels.
Next to the channel list
All
, which holds all installed channels,
you can set up a list of
Favourites
, view the
installed
Radio
stations separately or discover the newly added
channels in
New
.
Channel logos
In some countries, the TV can show the channel logos. If you do
not want these logos to appear, you can switch them off.
To switch off Channel logos . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Channel logos
and
press
OK
.
3 - Select
Off
and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
25
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of the channel
lists.
2 - Select the channel to rename.
3 - Press
.
You can enter text with the remote control keyboard or open
the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in the
name text field and press
OK
.
• To delete the character in front of the cursor, press
Backspace
.
• To enter a character, select the character with the arrow keys
and press
OK
.
• To select uppercase characters, press
.
• To select numbers or special characters, press
.
• When you are ready, press
to close the on-screen
keyboard.
• To finish renaming, select
Done
and press
OK
.
With the remote control keyboard*
• To delete a character, position the cursor behind the character
and press
.
• To enter a character, press the character on the keyboard.
• When you are ready, press
OK
to select
Done
.
Press
OK
again to finish renaming.
For more information on using the keyboard,
press
Keywords
and look up
Remote control, keyboard
.
* Only for the remote control with keyboard
Lock a channel
To prevent children from watching a channel or a programme,
you can lock channels or lock age rated programmes.
Lock a channel
You can lock a channel to prevent children from watching it. To
watch a locked channel you need to enter the Child lock code.
You cannot lock programmes from connected devices.
To lock a channel . . .
1 - While watching a TV channel, press
LIST
to open the
Channel list
.
2 - In any list, select the channel you want to lock.
3 - Press
OPTIONS
and select
Lock channel
. In a channel
list, a locked channel is marked with a lock
.
To unlock a channel, select the locked channel in the channel list.
Press
OPTIONS
and select Unlock channel. You will need
to enter the Child lock code.
Parental rating
To prevent children from watching a programme not suitable for
their age, you can use an age rating.
Some digital broadcasters have age rated their programmes.
When the age rating of a programme is equal to or higher than
the age you have set as age rating for your child, the programme
will be locked.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
To set an age rating . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
>
Child lock
>
Parental rating
and
press
OK.
3 - Enter a 4-digit Child lock code and confirm. Now you can set
an age rating.
4 - Set the age and press
OK
.
5 - Press
, repeatedly if necessary, to close the menu.
To switch off the parental age rating, select
None
as age setting.
The TV will ask for the code to unlock the programme. For
some broadcasters / operators, the TV only locks programmes
with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
>
Child lock
>
Change code
and
press
OK
.
3 - If a code is set already, enter the current Child lock code and
then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current code and
enter a new code.
1 - Press
and select
Setup
and press
OK
.
2 - Select Channel settings >
Child lock
>
Change code
and
press
OK
.
3 - Enter the overriding code
8888
.
4 - Now enter a new Child lock code and enter it again to
confirm.
Options for channels
While watching a channel, depending on the type of channel
(analogue or digital) you are watching or depending on the TV
settings you made, some options are available.
Open the options menu
While watching a channel, press
OPTIONS
.
26
Universal access
With Universal access switched on, you can set some options
for hearing impaired and visually impaired people.
For more information, press
Keywords
and look up
Universal access
.
Video selection
Digital TV channels can offer multi video signals (multi-feed
broadcast), different camera viewpoints or angles of the same
event or different programmes on one TV channel. The TV
shows a message if any such TV channels are available.
Subtitles
Switch
Subtitles on
or
Subtitles off
with this options. Select
Automatic
to show subtitles only when the sound is muted with
.
Subtitle language
For digital broadcast, you can select an available subtitle language
temporarily if none of your preferred languages are available.
For more information, press
Keywords
and look up
Subtitles
.
Audio languages
For digital broadcast, you can select an available audio language
temporarily if none of your preferred languages are available.
For more information, press
Keywords
and look up
Audio
languages
.
Dual I-II
If an audio signal contains two audio languages but one language
— or both — has no language indication, this option is available.
Common interface
If prepaid premium content is available from a CAM, you can set
the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that offers
HbbTV.
For more information, press
Keywords
and look up
HbbTV
.
MHP applications
Enable or disable the MHP applications.
For more information, press
Keywords
and look up
MHP
.
Status
Select
Status
to view technical information on the channel (if it is
analogue or digital) or a connected device you are watching.
Share
Enables the user to communicate his activity with his social
networks (such as Twitter, facebook or email).
Picture format
If black bars appear on top and bottom or on both sides of the
picture, you can adjust the picture format to a format that fills
the screen.
To change the picture format . . .
1 - While watching a TV channel, press
to open the
Picture
format
menu.
2 - Select a format from the list and press
OK
.
The following format can be available according the picture on
screen . . .
•
Basic
- Fill screen
- Fit to screen
•
Advanced
- Last setting
- Shift
- Zoom
- Stretch
- Native
- Undo
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV channels,
press
TEXT
.
To close Text, press TEXT again.
Select a Text page
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
27
3 - Press a colour key to select a colour-coded subject at the
bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
To select a subpage, press
or
.
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press
OPTIONS
and select
T.O.P. overview
.
Text options
In Text, press
OPTIONS
to select the following . . .
•
Freeze page
To stop the automatic rotation of subpages.
•
Dual screen / Full screen
To show the TV channel and Text alongside each other.
•
T.O.P. overview
To open T.O.P. Text.
•
Enlarge
To enlarge the Text page for comfortable reading.
•
Reveal
To unhide hidden information on a page.
•
Cycle subpages
To cycle subpages when these are available
.
•
Language
To switch the group of characters that Text uses to display
correctly.
•
Text 2.5
To activate the Text 2.5 for more colours and better graphics.
Text setup
Text language
Some digital TV broadcasters have several Text languages
available.
To set your primary and secondary Text language . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
>
Language
.
3 - Select
Primary Teletext
or
Secondary Teletext
.
4 - Select your preferred Text languages.
5 - Press
, repeatedly if necessary, to close the menu.
Text 2.5
If available, Text 2.5 offers more colours and better graphics.
Text 2.5 is activated as a standard factory setting.
To switch off Text 2.5 . . .
1 - Press
TEXT
.
2 - While watching the teletext, press
OPTIONS
.
3 - Select
Text 2.5
>
Off
.
4 - Press
, repeatedly if necessary, to close the menu.
Menu language
To change the language or the TV menus and messages . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Menu language
and
press
OK
.
3 - Select the language you want and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
Audio languages
If the TV channel broadcasts multiple or dual audio languages,
you can select your preferred audio language.
1 - While you watch TV, press
OPTIONS
.
2 - For digital channels, select
Audio language
. For analogue
channels, select
Alternate audio
. Press
OK
to confirm your
selection.
3 - Select from the available languages, then press
OK
.
Note:
If you have selected
Alternate audio
for analogue channels,
select between:
•
Main
: Primary audio language or
•
SAP
: Secondary audio language
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press
SUBTITLE
.
You can set subtitles to
On
,
Off
or
Automatic
.
To show subtitles when the broadcasted programme is not in
your language — the language you set for the TV, select
Automatic
. Also, this setting will show subtitles when you mute
the sound with
.
For analogue channels, subtitles must be made available in
Text
.
Subtitles for digital channels
There is no need to set subtitles in Text for digital channels.
Digital channels can offer several subtitle languages for a
programme. You can set a preferred primary and secondary
subtitle language. If subtitles in one of these languages are
available, the TV will show them.
28
If none of the preferred subtitle languages are available, you can
select another subtitle language which is available.
To set the primary and secondary subtitle language . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
and select
Languages
>
Primary
subtitles language
or
Secondary subtitles language
and press
OK
.
3 - Select a language and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
To select a subtitle language when none of your preferred
languages are available . . .
1 - Press
OPTIONS
.
2 - Select
Subtitle language
and select a language you want
temporarily and press
OK
.
Subtitles for analogue channels
For analogue channels, you need to make the subtitles available
for each channel manually.
1 - Switch to a channel and press
TEXT
to open Text.
2 - Enter the page number for subtitles, usually
888
.
3 - Press
TEXT
again, to close Text.
If you select On in the Subtitle menu when watching this
analogue channel, subtitles will be shown if available.
To know if a channel is analogue or digital, switch to the channel
and open
Status
in the
Options
menu.
Audio languages
Digital TV channels can broadcast audio with several spoken
languages for a programme. You can set a preferred primary and
secondary audio language. If audio in one of these languages is
available, the TV will switch to this audio.
If none of the preferred audio languages is available, you can
select another audio language which is available.
To set the primary and secondary audio language . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
and select
Languages
>
Primary
audio language
or
Secondary audio language
and press
OK
.
3 - Select a language and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
To select an audio language when none of your preferred audio
language is available . . .
1 - Press
OPTIONS
.
2 - Select
Audio language
and select an audio language you want
temporarily and press
OK
.
Audio languages for the hearing and visually impaired
Some digital TV channels broadcast special audio and subtitles
adapted for people who are hearing or visually impaired.
For more information, press
Keywords
and look up
Universal access.
Menu language
To change the language or the TV menus and messages . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Menu language
and
press
OK
.
3 - Select the language you want and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
Interactive TV
About iTV
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
On some pages, you can respond to a programme or vote, do
online shopping or pay for a video-on-demand programme.
HbbTV, MHEG, . . .
Broadcasters use various interactive TV systems : HbbTV
(Hybrid Broadcast Broadband TV) or iTV (Interactive TV -
MHEG). Interactive TV is sometimes referred to as Digital Text
or Red button. But each system is distinct.
Visit the broadcaster's Internet website for more information.
What you need
Interactive TV is only available on digital TV channels. To enjoy
the full benefits of Interactive TV, you need a high-speed
(broadband) Internet connection to the TV.
HbbTV
If a TV channel offers HbbTV pages, you must first switch on
HbbTV in the TV settings to view the pages.
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
and select
General settings
>
HbbTV
and
press
OK
.
3 - Select
On
and press
OK
.
4 - Press
, repeatedly if necessary, to close the menu.
If you want to avoid access to HbbTV pages on a specific
channel, you can block the HbbTV pages for this channel only.
1 - Tune to the channel of which you want to block the HbbTV
pages.
2 - Press
OPTIONS
and select
HBB TV on this channel
and
press
OK
.
3 - Select
Off
and press
OK
.
Use iTV
Open iTV pages
Most channels that offer HbbTV or iTV invite you to press the
29
key or
OK
key to open their interactive programme.
Navigate iTV pages
You can use the arrow and colour keys, the number keys and
the
key to navigate the iTV pages.
You can use the
(Play),
(Pause) and
(Stop) keys to watch
videos within iTV pages.
Digital Text (UK only)
To open Digital Text, press
TEXT
. To close, press
.
Close iTV pages
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV channel
and switch back.
About interactive TV
With interactive TV, some digital broadcasters combine their
normal TV programme with information or entertainment pages.
Note:
• You cannot download files to your TV with this feature.
• Not all TV programmes, commercials and features include
closed captioning information.
• You cannot respond to the digital content.
Visit the broadcaster's Internet website for more information.
7.2
Channel installation
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels and stores
new channels. New channels are stored in the All channels list
but also in the New channels list. Empty channels are removed.
If new channels are found or if channels are updated or
removed, a message is shown at TV start up. The TV must be in
standby to automatically update channels.
To switch off the message at start up . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
and press
OK
.
3 - Select
Channel installation
>
Channel update message
>
Off
.
To switch off the Automatic channel update . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
and press
OK
.
3 - Select
Channel installation
>
Automatic channel update
>
Off
and press
OK
.
Start an update
To start an update yourself . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Search for channels
and press
OK
.
3 - Select
Update channels
and follow the instructions on
screen. The update may take a few minutes.
In certain countries, the Automatic channel update is done while
watching TV or any moment when the TV is in standby.
Reinstall channels
You can search for and reinstall channels and leave all other TV
settings untouched. Alternatively, you can do a full new TV
installation.
If a child lock code is set, you will need to enter this code before
you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Search for channels
>
Re-install channels
and press
OK
.
3 - Select the country where you install the TV.
4 - Select
Antenna
(DVB-T)
or
Cable (DVB-C)
. The channel
search may take a few minutes. Follow the instructions on
screen.
Full installation
To redo a full TV installation . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Reinstall TV
and
press
OK
. The installation may take a few minutes. Follow the
instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV settings for
picture and sound. To switch back to the original Factory
settings . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
General settings
>
Factory
settings
and press
OK
.
3 - Press
OK
to confirm.
4 - Press
, repeatedly if necessary, to close the menu.
30
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users. In
some countries, Channel list copy is only available for copying
satellite channels.
With
Channel list copy
, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
by uploading a predefined channel list on a TV. Use a USB flash
drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with
Current software info
in
>
Setup
>
Software settings
.
Copy channel list
To copy a channel list . . .
1 - Switch on the TV which has its channels installed. Plug in a
USB memory device.
2 - Press
and select
Setup
and press
OK
.
3 - Select
TV settings
>
General settings
>
Channel list copy
>
Copy to USB
and press
OK
. To copy the channel list from this
TV, you might be asked to enter the Child lock code you
entered during the installation.
4 - When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
3 - To start the channel list upload, press
and
select
Setup
and press
OK
.
4 - Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter the
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this setting,
press
and select
Setup
and press
OK
. Select
Search for
channels
>
Re-install channels
and press
OK
. Press
and
later
Cancel
to leave the Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press
and select
Setup
and press
OK
.
Select
TV settings
>
General settings
>
Reinstall TV
>
OK
.
Select the correct country and skip the Search for channels.
Finish the installation. When done, continue with step 2.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
3 - To start the channel list upload, press
and
select
Setup
and press
OK
.
4 - Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter the
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you have selected one or the other during the channel
installation.
If you want to change the DVB setting to start a new channel
installation . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
and press
OK
.
3 - Select
Channel installation
>
Antenna connection
>
Antenna (DVB-T)
or
Cable (DVB-C)
and press
OK
.
4 - Select the DVB setting you want.
5 - Press
, repeatedly if necessary, to close the menu.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick scan)
or enter a specific symbol rate in the
Settings
menu while
installing. To set a
Symbol rate
, first set the Symbol rate to
Manual
.
Channel number conflicts
In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV shows
the list with channel number conflicts. You need to select which
31
TV channel you want to install on a channel number with
multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
input signal on the
Antenna
connection on the back of the TV
and set the TV in the appropriate system to view the installed
channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1 - Press
and select
Setup
and press OK.
2 - Select
Search for channels
and press OK.
3 - Select
Re-install Channels
.
4 - Select the country where you install this TV.
5 - Select
Cable (DVB-C)
.
6 - Select
Start to search channels
, or select
Settings for DVB-
C settings
.
7 - Press
, repeatedly if necessary, to close the menu.
Symbol rate mode
If your cable provider did not give you a specific
symbol rate
value to install the TV channels, leave the
Symbol rate mode
setting on
Automatic
.
If you received a specific symbol rate value, select
Manual
.
However, the value you received could be in the predefined list
of symbol rates already. Select
Predefined symbol rates
to
check if your value is available automatically.
Symbol rate
With the
Symbol rate mode
set to
Manual
, you can enter the
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
Network frequency mode
If you intend to use the fast
Quick scan
method in
Frequency
scan
to search for channels, select
Automatic
. The TV will use 1
of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for
channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
, you can
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the
faster
Quick scan
method and use the predefined settings used
by most cable providers in your country.
If this results in having no channels installed or if some channels
are missing, you can select the extended
Full scan
method. This
method will take more time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select
Off
.
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off
.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access
Module for pay TV services, select
Free + scrambled
. If you did
not subscribe to pay TV channels or services, you can select
Free channels
only.
For more information, press
Keywords
and look up
CAM -
Conditional Access Module
.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel . . .
1
- Tune to the channel.
2
- Press
and select
Setup
and press
OK
.
3
- Select
Channel settings
>
Channel installation
>
Digital :
reception test
and press
OK
.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the remote
32
control digit keys. Alternatively, select the frequency, position the
arrows on a number with
and
and change the number with
and
. To check the frequency, select
Search
and press
OK
.
If you use DVB-C to receive channels, the option
Symbol rate
mode is
available. For Symbol rate mode, select
Automatic
,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Press
and select
Setup
and press
OK
.
2 - Select
Channel settings
>
Channel installation
>
Analogue :
Manual installation
and press
OK
.
•
System
To set up the TV system, select
System
and press
OK
.
Select your country or the part of the world where you are
now.
•
Search channel
To find a channel, select Search channel and press
OK
. Select
Search
and press
OK
. You can also enter a frequency yourself. If
the reception is poor, press
Search
again. If you want to store
the channel, select
Done
and press
OK
.
•
Fine tune
To fine tune a channel, select
Fine tune
and press
OK
. You can
fine tune the channel with
or
.
If you want to store the channel found, select
Done
and press
OK
.
•
Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select
Store current channel
or
Store as new channel
.
You can redo these steps until you have found all available
analogue TV channels.
33
8
Home menu
From the Home menu, you can start any activity you can do
with the TV.
Open the Home menu to start watching TV or start watching a
disc on your Home Theatre System. Also in the Home menu,
you can open Smart TV to surf the Internet, start Skype or open
Help if you need information on using the TV.
Open the Home menu
1 - To open the Home menu, press
.
2 - Select an activity using the arrow keys and press
OK
to start
the activity.
3 - To close the Home menu without changing the current
activity, press
.
•
Help
Select
Help
and press
OK
to open the on screen Help. You can
look up a topic in an alphabetical list.
•
Setup
Select
Setup
to install channels or adjust all TV settings.
•
TV
Select
TV
and press
OK
to watch TV channels.
•
Smart TV
Select
Smart TV
and press
OK
to open the Smart TV start
page.
•
Source
Select
Source
and select a connected device in the list
underneath the icon. Press
OK
to switch to the selected device.
•
TV guide
Select
TV guide
and press
OK
to open a list of the current and
scheduled TV programmes of your channels.
•
Recordings
Select
Recordings
and press
OK
to open the list of your
recordings.
•
Skype
Select
Skype
to make video calls for free.
•
Demo
Select
Demo
to watch demonstration videos.
34
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 55PFT6309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PFT6309 in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PFT6309

Philips 55PFT6309 User Manual - German - 96 pages

Philips 55PFT6309 User Manual - Dutch - 92 pages

Philips 55PFT6309 User Manual - French - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info