561063
88
Zoom out
Zoom in
Previous page
1/115
Next page
1 - Network
2 - Hue bridge
3 - Hue bulbs
4 - Configure bulb
Network
In this first step, you will prepare the TV to find the
Philips hue
bridge
.
The TV and the Philips hue bridge must use the same network.
Connect the Philips hue bridge to the router — the router of
the network the TV is using.
Switch on the hue bulbs.
To start the configuration…
1 - Press
(Ambilight) and switch Ambilight
On
.
2 - Press
and select
Setup
and press
OK
.
3 - Select
TV settings
>
Ambilight
>
Ambilight+hue
and press
OK
.
4 - Select
Ambilight+hue
one step further, select
On
and press
OK
.
5 - Select
Configure Ambilight+hue
and press
OK
.
If the TV is connected to your home network, it will start
looking for the Philips hue bridge immediately.
If the TV is not yet connected to your network, the TV will start
the network setup first. You must connect the TV to your home
network.
With the TV connected to your network, go to page
Hue
bridge
.
For more info on connecting the TV to your home network,
press
Keywords
and look up
Network, wireless
.
Hue bridge
In the following step, you will link up the TV with the
Philips hue
bridge
.
The TV can only be linked up to one hue bridge.
To link the hue bridge…
1 - With the TV connected to the network, it will show the
available hue bridges. If the TV did not find your hue bridge yet,
you can select
Scan again
and press
OK
.
If the TV found the only hue bridge you have, select
Next
and
press
OK
.
If you have more than one hue bridge available, press
(up) or
(down) to select the hue bridge you want to use and then
select
Next
and press
OK
.
2 - After you pressed
OK
, go to the
Philips hue bridge
and
press the link button in the middle of the device. This will link
the hue bridge with the TV. Do this within 30 seconds. The TV
will confirm if a hue bridge is linked to the TV.
3 - On this confirmation, select
OK
and press
OK
.
With the Philips hue bridge linked to the TV, go to page
Hue
bulbs
.
Hue bulbs
In the following step, you will select the
Philips hue bulbs
that
have to follow the Ambilight.
You can select a maximum of 9 Philips hue bulbs for
Ambilight+hue.
To select the bulbs for Ambilight+hue…
1 - In the
Configure Ambilight+hue
menu, select
Hue bulbs
and
press
OK
.
2 - Mark the bulbs that have to follow the Ambilight. To mark a
bulb, select the bulb name and press
OK
.
3 - When you’re done, select the
OK
button and press
OK
.
With the bulbs marked for Ambilight+hue, go to page
Configure bulb
.
Configure bulb
In the following step, you will configure each
Philips hue bulb
.
To configure each hue bulb…
1 - Select the bulb name in the
Configure Ambilight+hue
menu
and press
OK
. The bulb you selected is blinking.
2 - First indicate where you placed the bulb relative to the TV. A
correct setting of the
Angle
will send the correct Ambilight
colour to the bulb. Press
(up) or
(down) to adjust.
3 - Press
(right) to set the distance.
4 - Secondly, indicate the
Distance
between the bulb and the
TV. The further away from the TV, the weaker the Ambilight
colour. Press
(up) or
(down) to adjust.
5 - Press
(right) to set the brightness.
6 - Finally, set the
Brightness
of the bulb. Press
(up) or
(down) to adjust.
7 - To stop configuring this bulb, select
OK
and press
OK
.
8 - In the
Configure Ambilight+hue
menu, you can select every
bulb and do the same.
9 - When all Ambilight+hue bulbs are configured, select
Finish
and press
OK
.
Ambilight+hue is ready for use.
You can always change the Ambilight+hue configuration later.
To change the configuration, press
and select
Setup
>
TV
settings
>
Ambilight
>
Ambilight+hue
.
Immersion
With
Immersion
, you can adjust the level of the Ambilight effect
for the Ambilight+hue bulbs.
To adjust the Ambilight+hue Immersion…
1 - Press
and select
Setup
and press
OK
.
2 - Select
TV settings
>
Ambilight
>
Ambilight+hue
>
Immersion
and press
OK
.
3 - Press
(up) or
(down) to adjust.
4 - Press
, repeatedly if necessary, to close the menu.
88
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 55PFS6409 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 55PFS6409 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 55PFS6409

Philips 55PFS6409 User Manual - German - 125 pages

Philips 55PFS6409 User Manual - Dutch - 121 pages

Philips 55PFS6409 User Manual - French - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info