64990
45
Zoom out
Zoom in
Previous page
1/56
Next page
EN-43
ENGLISH
Press 2. Æ to enter the list.
Press 3. ï or Î to select a connector.
Press 4. Æ to enter the list.
Press 5. ï or Î to select the device attached
to the connector.
Press 6. OK to select the device.
Repeat the procedure until all devices are 7.
correctly assigned to connectors.
Press 8. MENU to exit.
7�4�2 Assign the AUDIO IN mini-jack
connector
If you connect audio from a PC to the AUDIO
IN mini-jack connector at the back of the TV,
you must associate it to the HDMI connector.
Press 1. MENU on the remote control
and select TV menu > Installation >
Connections > Audio In L/R.
Connections AUDIO IN L/R
HDMI 1
HDMI 2
HDMI 3
...
EXT 3
HDMI 1
HDMI 2
HDMI 3
Side
AUDIO IN L/R
None
Press 2. Æ to enter the list.
Press 3. ï or Î to select the HDMI
connector used by the PC.
Press 4. MENU to exit.
7�4�3 Assign a channel decoder
Decoders that decode digital channels can be
connected to EXT 1 or EXT 2 (SCART). You
have to assign the TV channel as a channel to
be decoded. Then assign the connection where
the decoder is connected.
Press 1. MENU on the remote control
and select TV menu > Installation >
Decoder > Channel.
Press 2. Æ to enter the list.
Press 3. ï or Î to select the channel to
decode.
Press 4. Í and go back to select Status.
Press 5. ï or Î to select the connector used
by the decoder.
Press 6. MENU to exit.
7�5 Use Philips EasyLink
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices. Compliant
devices must be connected to your TV via
HDMI and assigned as described in Section 7.4.1
Assign devices to connectors.
7�5�1 Enable or disable EasyLink
Press 1. MENU on the remote control
then select TV menu > Installation >
Preferences > EasyLink.
Select 2. On or Off.
7�5�2 Use one-touch play
After enabling EasyLink, press play on your
device. The TV automatically switches to the
correct source.
7�5�3 Use one-touch standby
Press and hold . STANDBY on the TV
or device’s remote control for at least three
seconds. The TV and all connected HDMI
devices switch to standby.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 52PFL7203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 52PFL7203 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info