561037
22
Zoom out
Zoom in
Previous page
1/119
Next page
5
Switching On and Off
5.1
On, Standby or Off
Before you switch on the TV, make sure you plugged in the
mains power in the
POWER
connector on the back of the TV.
To put the TV in Standby when the indicator light is off, press
the small joystick key on the back of the TV. The indicator will
light up.
With the TV in Standby, press
on the remote control to
switch the TV on. Alternatively, press
HOME
.
Switch back to Standby
To switch the TV to Standby, press
on the remote control.
Switch Off
To switch the TV Off, press the joystick key. The indicator light
goes off.
The TV is still connected to the mains power but consumes very
little energy.
To switch off the TV completely, disconnect the power plug.
When disconnecting the power plug, always pull the power plug,
never the cord. Ensure that you have full access to the power
plug, power cord and outlet socket at all times.
5.2
Philips Logo Brightness
You can switch off or adjust the brightness of the Philips logo on
the front of the TV.
To adjust or switch off…
1 - Press
and press
(left)
Setup
.
2 - Click
General Settings
and click
Philips Logo Brightness
.
3 - Click
Maximum
,
Medium
,
Minimum
or click
Off
to switch off
the lighting of the logo.
4 - Press
BACK
repeatedly if necessary, to close the menu.
5.3
Keys on TV
If you lost the remote control or its batteries are empty, you can
still do some basic TV operations.
To open the basic menu…
1 - With the TV switched on, press the joystick key on the back
of the TV to bring up the basic menu.
2 - Press left or right to select
Volume
,
Channel
or
Sources
. If
the TV is in Shop location, you can also select
Camera
.
3 - Press up or down to adjust the volume or tune to the next
or previous channel. Press up or down to go through the list of
sources, including the tuner selection. Press the joystick key to
slide out the camera.
4 - The menu will disappear automatically.
To switch the TV off, select
TV Off
and press the joystick key.
5.4
Sleep Timer
With the
Sleep Timer
, you can set the TV to switch to Standby
automatically after a preset time.
To set the Sleep Timer…
1 - Press
and press
(Left)
Setup
.
2 - Click
General Settings
>
Sleep Timer
. With the slider bar
you can set the time to up to 180 minutes in increments of 5
minutes. If set to 0 minutes, the Sleep Timer is switched off. You
can always switch off your TV earlier or reset the time during
the countdown.
3 - Press
BACK
repeatedly if necessary, to close the menu.
5.5
Switch Off Timer
If the TV receives a TV signal but you don't press a key on the
remote control during a 4 hour period, the TV switches of
automatically to save energy. Also, if the TV does not receive a
TV signal nor a remote control command for 10 minutes, the
TV switches off automatically.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-Top Box - STB) and you do not use the remote
control of the TV, you should deactivate this automatic switch
off.
To deactivate the Switch Off Timer
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 49PUS7909 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 49PUS7909 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 49PUS7909

Philips 49PUS7909 User Manual - German - 129 pages

Philips 49PUS7909 User Manual - Dutch - 125 pages

Philips 49PUS7909 User Manual - Danish - 120 pages

Philips 49PUS7909 User Manual - French - 128 pages

Philips 49PUS7909 User Manual - Italian - 124 pages

Philips 49PUS7909 User Manual - Polish - 127 pages

Philips 49PUS7909 User Manual - Portuguese - 124 pages

Philips 49PUS7909 User Manual - Swedish - 120 pages

Philips 49PUS7909 User Manual - Turkish - 118 pages

Philips 49PUS7909 User Manual - Spanish - 124 pages

Philips 49PUS7909 User Manual - Norwegian - 120 pages

Philips 49PUS7909 User Manual - All languages - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info