Manual Philips 46pp9501 (page 28 of 34) (English, Dutch)

142646

Zoom out

Zoom in

1/34

27Connect Peripheral Equipment

Stereo amplifier and two extra FRONT speakers

To enhance the sound reproduction of your TV you can connect two extra

speakers via an external amplifier.

& Connect the audio cables to the audio input of your amplifier and to

AUDIO L and R at the back of your TV.

The output level is controlled by the volume control of your TV.

Note: Switch off the TV and your audio amplifier before connecting them.

Set the audio amplifiers’ volume to minimum.

é Select Extra front speakers Yes (Amp) in the Setup menu. See p. 7.

See Surround settings, p. 14 for the available Surround modes.

“ Adjust the volume of the audio amplifier.

You may make use of the Test tone function in the Surround Settings menu,

see p. 13, to have a reference of the loudness of the separate loudspeakers.

Note: Once you have adjusted the volume of the amplifier, do not change it while

watching TV as the whole configuration operates with the volume

adjustment of your TV.

REAR multimedia loudspeakers

You can enjoy Dolby Pro Logic Surround sound by connecting two rear

loudspeakers with built in amplifiers (or an audio amplifier with rear

loudspeakers).

& Connect the audio cables to the rear loudspeakers and to the Dolby

surround output S at the back of your TV as shown opposite.

There is only one cinch output for both speakers. Use a mono to stereo

adaptor.

Note: Switch off the TV and the rear loudspeakers before connecting them.

é Select Rear speakers Yes in the Setup menu. See p. 7.

See Surround settings, p. 14 for the available Surround modes.

Rear Surround Sound loudspeakers should always be located behind or to

either side of the listener at about 1 m above the seated listener’s head.

“ Adjust the volume of the rear loudspeakers.

You may make use of the Test tone function in the Surround settings menu,

see p. 13, to have a reference of the loudness of the separate loudspeakers.

Note: Once you have adjusted the volume of the rear loudspeakers, do not change it

while watching TV as the whole configuration operates with the volume

adjustment of your TV.

Dolby Pro Logic Surround amplifier

& Connect the Dolby Pro Logic Surround amplifier to the AUDIO L and R at

the back of your TV.

é Select Extra front speakers No in the Setup menu. See p. 7.

The audio output is now independent of volume, equalizer and surround

settings.

“ Switch off the volume of the TV with the mute key ¬.

All volume settings, tone control and speaker connections have to be done

via the external Dolby Pro Logic amplifier.

Attention: the sound info on screen will not correspond with the actual sound

reproduction.

Connect Extra loudspeakers / Amplifier

AUDIO

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 46pp9501 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 46pp9501 Manual

Product: