21NEXTVIEW
Select Picture/
NEXTVIEW-Teletext Guide
Press the æ key.
Press the b key.
The screen is divided into two parts: the left side for the normal main picture,
the right side for
NEXTVIEW
/Teletext Guide.
Press the b key to return to a full
NEXTVIEW/Teletext guide screen or press
the æ key to return to a full picture screen.
Acquisition and updating of NEXTVIEW information
Acquisition and updating of NEXTVIEW is done when you are watching the TV
channel of the selected
NEXTV
IEW provider, see Setup menu p. 8, or when the
TV is switched to standby.
The indicator in front of the TV remains orange during standby.
After all needed acquisition or updating is complete, it turns red.
Acquisition of fresh data will happen once during the night.
Note: it may be necessary to put the TV in standby mode when all
NEX
TVIEW
information is outdated, e.g. returning from holiday.
Video recorder restrictions with
NEX
TVIEW
The Record item and the automatic recording will only be present and
possible if your video recorder is equipped with
NEXTVIEWLink.
Your video recorder should be connected to
EXTERNAL 2. See Connect
Peripheral Equipment, p. 25.
The daily, weekly or series options, the number of recordings set and the way
overlapping recordings are managed, depend on the type of video recorder
you have.The moment all video recorder timers are used, the item
Record in
the menu will not be present.
Upload video recorder overview (only with Philips sets)
When the TV is switched on, the programmed record blocks are uploaded to
the TV to check if any manual addition or deletions have been done.This is
shown in the overview.
The video recorder manages and removes timer recordings when performed.
Some
NEXTVIEWLink video recorders do not allow a daily programming of the
recording to start on a Saturday or Sunday. In this case the item
daily will be
removed from the menu on those days.