Manual Philips 46pp9501 (page 14 of 34) (English, Dutch)

142646

Zoom out

Zoom in

1/34

13Use of the menus

Surround settings menu

Select Surround settings in the Sound menu.

The contents of the Surround settings menu depends on the available and

selected Surround modes.

* Centre Volume control is available with Pro Logic and Dolby 3 Stereo modes.

See Surround Mode Chart on the following page and Installation/Setup menu,

p. 7 for further details.

Note: you can select only those surround modes which can be used with the

broadcasted signal.

The graphical representation of the speakers is displayed on screen when

controls are being changed or when in test tone mode.

The drawing on screen is updated according to the chosen setup and the

selected surround mode. Speakers which are active are highlighted.

In Dolby Virtual mode the graphical representation of the rear loudspeakers is

replaced by the symbol ®r.The menu item

3D effect appears and the level

of the 3D effect can be adjusted.

Note: if extra front speakers are connected and selected in the Setup menu, all

internal TV speakers produce centre sound. See Connect Peripheral Equipment, Extra

loudspeakers/Amplifier, p. 27.

Adjustment of the volume level of the loudspeakers

The menu item Test which only appears in Dolby*3 Stereo, Dolby Virtual

mode or Pro Logic, enables you to have a reference of the internal and the

rear loudspeakers loudness.

& Select Dolby 3 Stereo, Dolby Virtual or Pro Logic.

é Select Test Start and press the OK key.

A steady noise tone is switched sequentially through the available

loudspeakers, for 2 seconds each.This enables you to have a reference of the

loudness of each loudspeaker.

The loudspeakers activated light up in the screen graphic.

“ Select Centre Volume, Balance, Rear Volume, 3D Effect and alter the

selected adjustments.

‘ Select Test Stop and press the OK key when you have finished the

adjustment of the speaker levels.

With two extra front loudspeakers connected

To enhance the sound reproduction of your TV you may connect two extra

front loudspeakers via an external amplifier. See Connect Peripheral

Equipment, Extra loudspeakers/Amplifier, p. 27.

In the Surround modes, Hall and Stereo

(+ amp) is added to indicate that you

should switch on your amplifier as in these modes the internal TV speakers

do not produce any sound.

Note: If extra front speakers are connected and selected, all internal TV speakers

produce centre sound in the surround modes Pro Logic and Dolby 3 Stereo.The TV’s

internal speaker system can also be used with an external Amplifier for Centre

Channel surround sound playback. See the Connect Extra loudspeakers/Amplifier

section, p. 27, for details.

‘Dolby’ ‘Pro Logic’ and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

Surround settings

Test Start

Test Stop

Centre Volume

Balance

Rear Volume

3D effect

Surround Mode

Surround settings

Test Start

Test Stop

Centre Volume*

Balance

Rear Volume

3D effect

Surround Mode

••

•••••

••

•

•••••

•••

Available menu items in case of the selected

and available Surround modes.

stereo

Dolby Virtual

Pro Logic

Dolby 3 Stereo

Hall

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 46pp9501 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 46pp9501 Manual

Product: