3
Preparation
Make sure that the wall mount (see wall mounting instructions
supplied) is being fixed securely enough so that it can carry at least
50 kg.
Do not insert the power plug in a wall socket before all connections
are made.
& Place the receiver box wherever you want, but leave at least 5 cm space free
all around the box for ventilation.
(E.g. on the ground, in a cupboard, behind a wall, in another room....)
é Connect one of the supplied aerial cables 1, and the
DISPLAY POWER 3,
DISPLAY VIDEO 2, and SUBWOOFER 4 cables as shown in the inside
frontcover of this handbook.
Make sure all screws of the cables 2 and 3 are tighted well.
“ Check if the red loudspeaker button at the back of the receiver is in the
INTERNAL SPEAKERS position.
‘ Connect the two Surround Sound rear loudspeakers supplied 5.
Always connect both Surround Sound loudspeakers: the left rear loudspeaker
at
REAR L; the right rear loudspeaker at REAR R.
Push the connector clip down and insert the end of the wire into the opening: the
positive wire (the one with the black line) to the grey loudspeaker connection; the
negative wire to the black loudspeaker connection. Do not insert the wires too far.
The Surround Sound loudspeakers should always be located behind or to either side of
the listener. If preferred you can also hang the loudspeakers on the wall.
( To connect your computer, see p. 24.
To connect other peripherals, see p. 20.
In order to obtain the best result, please use only the supplied antenna cables
between the receiver box and videorecorder, and between videorecorder and
antenna connector.
§ Insert the mains plug supplied 6 into the power socket at the back of the
receiver and in the wall socket with a mains voltage of 110-240V.
Please, only use the supplied rim-earthed mains cord with its built-in
suppressor to ensure safety and suppress EMC.
è Remote control: Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type R03G-1,5V).
Press the TV key next to the display to be sure your remote control is in the
TV mode.
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries exhausted batteries may not be disposed of with your
household waste. Please ensure you dispose of exhausted batteries according to local
regulations.
! Switch TV on : Press the power button A on the front of the receiver.
A green indicator and the screen light up.
If the indicator is red, press the + P - key or a digit key on the remote control.
The green indicator blinks every time you press a key on the remote control.
When you switch on your set for the first time, the
MENU LANGUAGE automatically
appears on the screen. Alternatively the explanation appears in the different
languages.
