1212
The TV continuously measures and corrects all incoming signals in order to
provide the best picture possible.The ambient light sensor adjusts the settings
according to the viewing conditions in the room (only when having selected the
Active control value Maximum).
& Press the h key on the remote control.
Note: Switch off all menus on screen.
é The Active Control menu appears.
“ Press the cursor up/down to select the Active Control values Off,
Minimum, Medium or Maximum.
The picture settings are being optimised continuously and automatically
which is displayed by bars.Those menu items can not be selected.
‘ Press the cursor right to select Smart Picture.
( Press the cursor up/down to select one of the predefined picture settings.
§ Press the cursor right to select Active Display.
è Press the cursor up/down to select Show bars, one of the Dual screen
demos or
Off.When you select Dynamic contrast, Pixel Plus 2, Digital
Noise Reduction or Digital Natural Motion, the TV screen is divided into
two parts: in the left part the selected picture quality setting is switched off;
in the right part it is switched on.
Note: Dependent on the input signal, one or more Dual screen demos may not be
selectable.
! Press the h key again to switch off the Active Control menu.
& Press the cursor right to select Sound.
é Select the menu items in the Sound menu with the cursor up/down and
adjust the settings with the cursor left/right.Remember, control settings are
at normal mid-range levels when the bar scale is centred.
Smart sound
Select Smart sound to display a list of predefined sound settings, each
corresponding with specific factory settings of Treble and Bass.
Personal
refers to the personal preference settings of sound in the sound menu.
Notes:
- Some menu items are only available in case of a Cinema Link configuration and
when the Cinema Link is activated. Others are steered by the audio receiver
instead of by the TV. See the separate Cinema Link booklet supplied, p. 25.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo transmission.
- Nicam/Analogue is only selectable in case of Nicam transmission.
Sound
Smart sound
Equalizer
Volume
Balance
Loudness
Headphone volume
Surround mode
(Dual I-II)
(Mono/Stereo)
(Nicam/Analogue)
(3D effect)
AVL
Delta volume
TV
Sound
Active Control
