6
& Select Automatic install in the Install menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 14.)
é Press the cursor down.
The autoprogramming option label
Start appears.
“ Press the cursor right.
‘ The message Searching appears and the progress of autoprogramming is
displayed.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) is detected, a programme list appears.Without ACI broadcast, the
channels are numbered according your language and country selection.You can
use Reshuffle to renumber them.
See p. 7.
It is possible that the cable company or the TV channel displays a broadcast selection
menu. Layout and items are defined by the cable company or the TV channel. Make
your choice with the cursor and press the
OK key.
Searching for and storing TV channels is done channel by channel.You must go
through every step of the Manual Installation menu.
& Select Manual install in the Install menu.
é Press the cursor down.
Follow the instructions on screen.
Note: Search or direct selection of a TV channel.
If you know the frequency, the C- or S-channel number, enter the 3 or 2 digits of
the frequency or the channel number directly with the digit keys 0 to 9 (e.g. 048).
Repeat to search for another TV channel after you have stored the selected
TV channel.
After language and country are set correctly, you can now search for and store the TV channels in two different ways: using Automatic
Installation or Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
Manual install
Install
Selection mode
System
Programme
Search
Fine tune
Store
Automatic install
Install Start
Install
Manual installation
Automatic installation
Store TV channels