8
Devices with Component Video Output Connectors (YPbPr)
CVI-1 can handle 480i, 480p, 576i, 576p, 720p and 1080i signals.
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.
é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input ANTENNA
x 75 Ω jack.
“ Connect the three separate component video cables 3 to the device having component video
outputs (YPbPr), such as DVD-players, laser-disc players, videogame players, satellite receivers, or other
equipment and to the
Y, Pb and Pr jacks of CVI-1 on the TV.
‘ Connect the audio cable 4 to the device’s AUDIO L and R jacks and to the L and R audio jacks of
CVI-1.
Note: the labels for the component video sockets may differ depending on the DVD player or the device
connected. Although the abbreviations may vary the letters B and R stand for blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD player’s or device’s instructions for use for
definitions and connection details.
( Press the AV key on the remote control repeatedly until CVI-1 is selected.
