52908
10
Zoom out
Zoom in
Previous page
1/18
Next page
2005 HF Series User’s Manual 112505.0959
10
CHANNEL INSTALL (>)
The CHANNEL INSTALL menu allows the user to configure the channels that can be
accessed. When installing the channels, different inputs can be mapped to TV channels to
allow seamless integration into the channel map. The two sections below explain how to
install analog channels and AV inputs, and how to install digital channels.
Installing Analog channels
When selected, CHANNEL INSTALL menu appears as follows. Configure the inputs
and channels as described.
CHANNEL INSTALL
CHANNEL
TV 1 125
SOURCE
ANALOG/DIGITAL / AV 1 / AV 2 /HDMI 1/HDMI 2/
SIDE AV
RING
SAVED
LABEL
( ) >
AUTO INSTALL TV
>
CHANNEL:
Select the channel you wish to configure.
SOURCE:
Select the input source that you wish to associate with the specified CHANNEL. This
feature enables you to “map” (re-assign) a numeric channel number to a video input,
rather than to its normal RF TV channel (i.e. ANALOG). In other words, TV channel
2 could be used to select the AV 1 video input instead of RF (ANALOG) channel 2.
Special instructions for mapping digital channels are included below.
RING:
Specify whether the current channel or input is to be SAVED to or DELETED from
the channel ring (i.e., list of channels available for selection by means of a standard
guest remote control).
LABEL:
Input a maximum of 8 characters for the channel’s label. Cursor to the right to start
the first character. Cursor left or right to navigate between character positions within
the label field. Cursor up or down to select characters from the list: A to Z, 0 to 9, -, .,
/, :, =, ?, ;, <, >, @ or space. To edit, re-input the character at its position. To exit,
press “M” to navigate out of the label editing field.
AUTO INSTALL TV:
When AUTO INSTALL TV is selected, the TV performs an automatic search for the
presence of viable RF analog signals at its tuner input. Channels 1 through 125 will
be checked. When a viable signal is detected on a given channel, that channel is
added to the channel ring. Any command from a remote control terminates the AUTO
PROGRAM session.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 42HF7543 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 42HF7543 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info