141434
36
Zoom out
Zoom in
Previous page
1/50
Next page
36 Use more of your TV
6.3.2 Uninstall or reinstall a channel
To uninstall a stored channel so that it is no longer
possible to tune to.
Reinstall an earlier uninstalled channel.
Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Rearrange.
® Press navigation key right to enter the channel
list.
ÒPress navigation key up or down in the channel
list to select the channel you want to uninstall
or reinstall.
Press the green key to uninstall or reinstall the
channel.
º Press Menu to quit the menu.
6.3.3 Reorder the channels
Change the order of the stored channels.
Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Rearrange.
® Press navigation key right to enter the channel
list.
ÒPress navigation key up or down in the channel
list to select the channel you want to reorder.
Press the yellow key to move up the highlighted
channel in your channel list.
º Press the blue key to move down the
highlighted channel in your channel list.
Press Menu to quit the menu.
6.4 Automatic
channel management
Once a day, at 3 AM, all available TV channels are
updated automatically.The update is done if your
TV is in standby.
Earlier stored channels not found by the update will
be removed from the channel list.
You can do this update yourself anytime.
Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Installation update.
® Press navigation key right to enter the
Installation update menu.
ÒPress
OK.
Press the green key to start.
The update starts and may take a few minutes.
º When the update is completed, press the red
key to return to the Channel installation menu.
Press Menu to quit the menu.
6.5 Digital reception test
If you receive Digital TV broadcasting you can check
the quality and signal strength of a specific channel.
Select a channel.
® Press Menu on the remote control and select
TV menu > Installation > Channel installation >
Digital:Test reception.
ÒPress navigation key right to enter
Press
OK.
The channel frequency, the network name, the
signal quality and strength appear.
º Press the green key to start or directly enter
the frequency of the channel you want to test.
If the signal quality and strength are poor,
reposition the antenna.
Press the yellow key to store the frequency if
the signal quality and strength are good.
Press the red key to return to the Channel
installation menu.
Press Menu to quit the menu.
à Tip
To achieve the best results, contact a specialised
antenna installer.
6.6 Factory settings
If you are lost in the picture, sound and Ambilight
settings, you can reset the TV to the factory settings
of picture, sound and Ambilight
Press Menu on the remote control and select
TV menu > Installation > Factory settings.
® Press navigation key right to enter the Factory
settings menu.
ÒPress
OK.
Press Menu to quit the menu.
rNote
The channel installation settings are not changed.
2675.1 eng 03-08-2007 14:51 Pagina 36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 42 pfl 9900d 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 42 pfl 9900d 10 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info