811228
47
Zoom out
Zoom in
Previous page
1/52
Next page
45
12. Troubleshooting &
FAQs
12.1 Troubleshooting
This page deals with problems that can
be corrected by a user. If the problem
persists after you have tried these
solutions, contact a Philips customer
service representative.
Common Problems
No Picture (Power LED not lit)
Make sure the power cord is
plugged into the power outlet and
the back of the monitor.
First, ensure that the power button
on the front of the display is in the
OFF position, then press it to the ON
position.
No Picture (Power LED is White)
Make sure the computer is turned
on.
Make sure the signal cable is
properly connected to your
computer.
Make sure the monitor cable has no
bent pins on the connecting side. If
yes, repair or replace the cable.
The Energy Saving feature may be
activated Screen says
  
Make sure the display cable
is properly connected to your
computer. (Also refer to the Quick
Start Guide).
Check to see if the display cable has
bent pins.
Make sure the computer is turned
on.
Visible signs of smoke or sparks
Do not perform any troubleshooting
steps
Disconnect the monitor from the
mains power source immediately for
safety
Contact Philips customer service
representative immediately.
Imaging Problems
The image appears blurred, indistinct, or
too dark
Adjust the contrast and brightness
on On-Screen Display.
An "after-image", "burn-in" or "ghost
image" remains after the power has
been turned o.
Uninterrupted display of still or
static images over an extended
period may cause "burn-in", also
known as "after-imaging" or "ghost
imaging", on your screen. "Burn-in ",
"after-imaging", or "ghost imaging"
is a well-known phenomenon in LCD
panel technology. In most cases, the
"burn-in" "after-imaging" or "ghost
imaging" will disappear gradually
over some time after the power has
been switched off.
Always activate a moving screen
saver program when you leave your
display unattended.
Always activate a periodic screen
refresh application if your LCD
display will display unchanging static
content.
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in”,
after-imaging” or “ghost imaging”
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 40B1U6903CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 40B1U6903CH in the language / languages: English as an attachment in your email.

The manual is 11.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 40B1U6903CH

Philips 40B1U6903CH User Manual - Dutch - 53 pages

Philips 40B1U6903CH User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info