811231
26
Zoom out
Zoom in
Previous page
1/44
Next page
24
A reminder message that pops up after 4 hours
of continuous use, and will then appear every 2
hours after.
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink until
it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 4HOURS
Do you want to activate Pixel Refresh now?
Yes No
Compulsory execution message
To maintain the panel’s quality, Pixel Refresh will automatically run after
the monitor is in use for 16 continuous hours. This message serves as an
advisory that Pixel Refresh will begin in 10 minutes. It is important to note
that Pixel Refresh is mandatory for proper care of your panel and cannot
be skipped. While in process,Pixel Refresh will be indicated by a
blinking LED indicator until �nished. It is recommended that you do not
unplug the power cable during the process.
Panel Refresh:
After a cumulative usage of 2000 hours,
Panel Refresh will automatically run
and adjust the uniformity of QD OLED
to prevent image retention caused by
static content. When it is activated, the
screen will go into Standby mode for
approximately 1 hour while it nishes
the process. It is important to note that
you cannot skip Panel Refresh process
and when the Panel Refresh has nished,
the LED indicator will stop blinking.
When it is apparent that the Panel
Refresh has nished, turn the monitor
back on and resume activity.
Compulsory execution message
To reduce the risk of image retention, Panel Refresh will automatically run after in use
for a long periods of time.
Panel Refresh will take around an hour and Power LED will blink until it is �nished.
   
While in process, Panel Refresh will be indicated by a blinking LED indicator until
�nished.
It is recommended that you do not unplug the power cable during the process.
• Auto Warning
Default setting is On to provide
messages as reminders of Pixel Refresh
automatically. You can go to OSD menu
> Setup > OLED Panel Care > Auto
Warning to turn o Auto Warning
messages. If you turn o Auto Warning,
the messages will not appear, yet the
calculation of cumulative usage hours
continues. If Auto Warning is set to
O, the cumulative usage exceeds 16
hours, Pixel Refresh will be activated
automatically when you press the power
button or the monitor goes into Standby
mode.
A reminder message that pops up after 4 hours
of continuous use, and will then appear every 2
hours after.
To maintain the panel quality, Pixel Refresh will automatically
run after in use for a periods of time.
Pixel Refresh will take few minutes and Power LED will blink until
it is �nished.
Please do not unplug the power cable during the process.
Accumulative usage: 4HOURS
Do you want to activate Pixel Refresh now?
Yes No
Note
1. When the monitor is in standby
mode for over two hours, Refresh will
recognize this and run automatically.
Also, if the user turns o the monitor,
Refresh will run automatically.
This ensures your display has
the best possible performance
while minimizing the amount of
interruptions.
2. Please note that if the temperature
inside the monitor’s shell reaches
a temperature of over 45 degrees
Celsius, Pixel Refresh nor Panel Refresh
can be activated.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 34M2C8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 34M2C8600 in the language / languages: English as an attachment in your email.

The manual is 6.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 34M2C8600

Philips 34M2C8600 User Manual - German - 45 pages

Philips 34M2C8600 User Manual - Dutch - 44 pages

Philips 34M2C8600 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info