811108
51
Zoom out
Zoom in
Previous page
1/71
Next page
21. Software
21.1. Update Software
Search for Updates
Update from Internet
(Home) > Settings > Update software > Search for
updates > Internet (Recommended)
Look for a software update yourself.
• If the TV is connected to the Internet, you may receive a
message to update the TV software. You need a high-
speed (broadband) Internet connection. If you receive
this message, we recommend you to carry out the
update.
• During the software update, there is no picture and the
TV will switch off and on again. This might happen
several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not press
the power switch on the TV or on the remote control
during the software update.
Update from USB
(Home) > Settings > Update software > Search for
updates > USB
• You need a computer with a high-speed Internet
connection and a USB memory device to upload the
software on the TV.
• Use a USB memory device with 512MB free space.
Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates > USB,
then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB connections
of the TV.
Select Start and press OK. An identification file is written
on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then back
on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then back
on again. Please wait.
The TV software has been updated. You can use the TV
again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory device.
Local Updates
(Home) > Settings > Update software > Search for
updates > USB > Local updates.
For dealers and expert users.
21.2. Software Version
(Home) > Settings > Update software > Current
software info
To view the current TV software version.
21.3. Automatic Software
Update
(Home) > Settings > Update software > Automatic
software update
To switch on Automatic software update to update your
TV software automatically. Leave the TV in standby.
When the setting is enabled, the upgrade gets
downloaded when the TV is powered ON and installed
15min after the TV has gone to standby (as long as there
is no alarm scheduled).
When the setting is disabled, the "Upgrade Now" /
"Later" OSD will be shown.
21.4. View Software Update
History
(Home) > Settings > Update software > View
software update history
Display the list of software versions that are successfully
51
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 32PFS6908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 32PFS6908 in the language / languages: English as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 32PFS6908

Philips 32PFS6908 User Manual - German - 79 pages

Philips 32PFS6908 User Manual - Dutch - 76 pages

Philips 32PFS6908 User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info