811108
36
Zoom out
Zoom in
Previous page
1/71
Next page
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV remote
control
(Home) > Settings > General
settings > EasyLink > EasyLink remote control > On
EasyLink 2.0 sound control
(Home) > Settings > General
settings > EasyLink > EasyLink 2.0 sound control > On
Slide to turn On/Off to control the sound settings of the
HDMI sound system. You can adjust these settings via
Frequent settings or Settings > Sound > EasyLink 2.0.
This is only applicable with EasyLink 2.0 compliant HDMI
sound system.
Note:
- EasyLink might not work with devices from other
brands.
- The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera
Link. Not all brands are fully compatible with EasyLink.
Example HDMI CEC branding names are property of their
respective owners.
Screensaver Settings
(Home) > Settings > General settings > Screensaver
settings > Screensaver
Select Backdrop to enable the Screensaver. Select Off to
disable the Screensaver.
(Home) > Settings > General settings > Screensaver
settings > When to start
Set the duration (in minutes) when TV is in idle state
before activating the Screensaver.
(Home) > Settings > General settings > Screensaver
settings > Preview
Press OK to preview the Screensaver.
Power-on Behaviour
Set the Power-on behaviour
(Home) > Settings > General settings > Power-on
behaviour
Set the TV to stay on Home screen or on Last source
when power on the TV.
Eco Settings
Set screen off to save energy consumption
(Home) > Settings > General settings > Eco
settings > Screen off
Select Screen off, the TV screen is switched off, to switch
the TV screen back on, press any key (except
AMBILIGHT*, Volume + or - keys) on the remote
control.
* AMBILIGHT key is only available on models which
support Ambilight function.
Set the Light Sensor
(Home) > Settings > General settings > Eco
settings > Light sensor
To save energy, the built-in ambient light sensor lowers
the brightness of the TV screen when the surrounding
light darkens. The built-in light sensor automatically
adjusts the picture to the lighting conditions of the
room.
Set TV switch off timer
(Home) > Settings > General settings > Eco
settings > Switch off timer
Press the arrows (Right) or (Left) to adjust the
value. The value 0 (Off) deactivates the automatic switch
off.
Select Switch off timer, the TV switches off automatically
to save energy.
• TV switches off if receiving a TV signal but you don't
press a key on the remote control during a 4 hour period.
• TV switches off if not receiving a TV signal nor a remote
control command for 10 minutes.
• If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not use the
remote control of the TV, you should deactivate this
automatic switch off, to set the value to 0.
Location - Home or Shop
(Home) > Settings > General settings > Location
• Select the location of your TV
• Select Shop, the picture style is switched back to Vivid,
and can adjust shop settings.
• Shop mode is for in-store promotion.
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 32PFS6908 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 32PFS6908 in the language / languages: English as an attachment in your email.

The manual is 1.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 32PFS6908

Philips 32PFS6908 User Manual - German - 79 pages

Philips 32PFS6908 User Manual - Dutch - 76 pages

Philips 32PFS6908 User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info