706058
34
Zoom out
Zoom in
Previous page
1/138
Next page
Problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n/ac devices in your proximity might
disturb the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
DHCP
• If the connection fails, you can check the DHCP
(Dynamic Host Configuration Protocol) setting of the
router. DHCP should be switched on.
Wired Connection
What You Need
To connect the TV to the Internet, you need a
network router with a connection to the
Internet. Use a high-speed (broadband) connection
to the Internet.
Make the Connection
Make the Connection - WIRED
Press
Home > Settings > Wireless and
Networks > Connect to Network > WIRED.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the network
connection.
4 - A message will be shown when the connection is
successful.
If the connection fails, you can check the DHCP
setting of the router. DHCP should be switched on.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
Settings
View Network Settings
Press
Home > Settings > Wireless and
Networks > Settings > View Network Settings.
You can view all current network settings here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
Network Configuration - DHCP / Static IP
Press Home > Settings > Wireless and
Networks > Settings > Network Configuration >
DHCP / Static IP .
Select DHCP or, if you are an advanced user, you can
setup your network with static IP addressing.
Network Configuration - Static IP Configuration
Press Home > Settings > Wireless and
Networks > Settings > Static IP Configuration.
1 - Select Static IP Configuration and configure the
connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1, or DNS 2.
Wake on LAN (WoL)
Press Home > Settings > Wireless and
Networks > Settings > Wake on LAN (WoL).
Disable/Enable Wake on LAN (WoL). You may wake
up TV using an external device on the same LAN.
Wake on Wi-Fi (WoWLAN)
Press Home > Settings > Wireless and
Networks > Settings > Wake on Wi-Fi (WoWLAN).
Disable/Enable Wake on Wi-Fi (WoWLAN). You may
wake up TV using an external device on the same Wi-
Fi.
Network Type
Press Home > Settings > Wireless and
Networks > Settings > Network Type.
• Wired - Connecting to a wired network.
• Wireless - In the list of found networks, select on
your wireless network. If your network is not in the list
34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 32HFL5014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 32HFL5014 in the language / languages: German as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 32HFL5014

Philips 32HFL5014 User Manual - German - 139 pages

Philips 32HFL5014 User Manual - Dutch - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info